Did some rearranging today...
#1
Did some rearranging today...
I've been getting some PM's lately about my catch can/overflow tank/battery relocation.
I was doing some other weight reduction today, and decided to rearrange my overflow tank and PCV catch can. I took some pics. Here ya go.
Original position:
Overflow tank bolted through the inner fenderwell:
Relocated with some cheap clamps from Home Depot to the core support:
Damn hose was pinched on the Catch Can:
Fixed it with a 90* hose fitting:
This is for the guy that PM'ed me about my ground up front, Ground is the clear jacketed copper wire up on the fender:
This is where it runs to behind the starter:
The ground in the back by the battery:
Hope this helps someone. Ask questions if you'd like to know about anything.
I was doing some other weight reduction today, and decided to rearrange my overflow tank and PCV catch can. I took some pics. Here ya go.
Original position:
Overflow tank bolted through the inner fenderwell:
Relocated with some cheap clamps from Home Depot to the core support:
Damn hose was pinched on the Catch Can:
Fixed it with a 90* hose fitting:
This is for the guy that PM'ed me about my ground up front, Ground is the clear jacketed copper wire up on the fender:
This is where it runs to behind the starter:
The ground in the back by the battery:
Hope this helps someone. Ask questions if you'd like to know about anything.