325/50s on 10s or 12s
on my car, teh 10s will bulge the sidewalls of the 325 radials. IMO it needs more than a 10" wide wheel. definately more contact patch. click on the link in my sig and you will see
More contact patch, pulls the tire out so you can run more air.
It looks like wolfe racecraft car runs 15x12's you can see it on their site.
If you're going to get rims I would run the 15x12 vs. the 15x10.
I think you need to pull the rear end and narrow it now that you have all that room and run a 15x12 with a deep dish like a 3" or 4"
Hey it's only money right
It looks like wolfe racecraft car runs 15x12's you can see it on their site.
If you're going to get rims I would run the 15x12 vs. the 15x10.
I think you need to pull the rear end and narrow it now that you have all that room and run a 15x12 with a deep dish like a 3" or 4"
Hey it's only money right
Last edited by RAGENZ28; Dec 24, 2007 at 07:33 PM.
Thread Starter
7 Second Club
iTrader: (11)
Joined: Jul 2002
Posts: 8,758
Likes: 9
From: Port Tobacco, MD
Well, Weld can make a 15 x 12 with a 8"BS so it would fit without any modifications. New rims wouldn't be much of a hassle, I'd have to cut the ends off and cut some off the axles also.
Phil
Phil
