Vette Coilovers Setup for Drags - recommendations....
Thread Starter
Joined: Sep 2007
Posts: 367
Likes: 2
From: Texas Hill Country
Vette Coilovers Setup for Drags - recommendations.... I have some Pfadts on the 2001 Z06 with a heavy 408 in the car. The suspension is ride height, spring rate, and compression/rebound (one way) adjustable units.
Front - spring as soft as I can get it; shocks loose
Rear - medium firm; shocks in the middle
Correct or correction?
Should I set ride height up even front to rear? I realize the car isn't going to launch like a drag car but I would like to get closer to "decent" weight transfer but to mainly remove unloading of the rear tires on launch. Thanks.
Front - spring as soft as I can get it; shocks loose
Rear - medium firm; shocks in the middle
Correct or correction?
Should I set ride height up even front to rear? I realize the car isn't going to launch like a drag car but I would like to get closer to "decent" weight transfer but to mainly remove unloading of the rear tires on launch. Thanks.
