Drag Racing Tech
Sponsored by:
Sponsored by:

Air Bag Installation

Thread Tools
 
Search this Thread
 
Old 08-07-2003 | 05:40 PM
  #1  
Ken G's Avatar
Thread Starter
TECH Enthusiast
iTrader: (1)
 
Joined: Nov 2001
Posts: 564
Likes: 0
From: Simsbury,CT
Default Air Bag Installation

I just got my Air Lift air bag and it doesn't come with any instructions. I've got a couple of questions:

1) Should the air valve stem end be up or down (guessing up)?
2) Where in the spring should the bag be located (bottom, middle, top)?
3) Does the seperate large plastic disk just sit on the valve stem end of the bag?

Thanks, Ken
Old 08-07-2003 | 06:35 PM
  #2  
Wicked ls 1's Avatar
TECH Enthusiast
 
Joined: Jul 2002
Posts: 544
Likes: 0
From: Lockport,IL
Default Re: Air Bag Installation

I just got my Air Lift air bag and it doesn't come with any instructions. I've got a couple of questions:

1) Should the air valve stem end be up or down (guessing up)?
2) Where in the spring should the bag be located (bottom, middle, top)?
3) Does the seperate large plastic disk just sit on the valve stem end of the bag?

Thanks, Ken
I put my stem facing down,installed the bag at the bottom that where it will wind up anyhow, and yes the disk goes on the stem side hope this helps did mine last week and no problems on the street Ill find out at superchevy show this weekend
Old 08-07-2003 | 06:39 PM
  #3  
Ken G's Avatar
Thread Starter
TECH Enthusiast
iTrader: (1)
 
Joined: Nov 2001
Posts: 564
Likes: 0
From: Simsbury,CT
Default Re: Air Bag Installation

Thanks a lot Wicked! I'm on my way out to the garage to pop it in. Good luck this weekend .
Old 08-08-2003 | 06:27 PM
  #4  
Wicked ls 1's Avatar
TECH Enthusiast
 
Joined: Jul 2002
Posts: 544
Likes: 0
From: Lockport,IL
Default Re: Air Bag Installation

Thanks, did some t&t today at the track seems like it helped with the 60ft the bag position I dont think matters its in the center of the spring now.




All times are GMT -5. The time now is 09:15 AM.