Car Got Dyno'd Today
 

Vortech v9-g stock 3.125 pulley
Speed Inc Si 5 cam 231/237 112lsa
Vigilante 3200 stall
3.42 gear ratio
stock bottom end
Pacesetter Headers
Magnaflow Exhaust
42# injectors
in line fuel pump.

96% injector cycle. injectors where almost maxed. jeremy formato tune. 470/475 the videos should be up tonight or tomorrow. Thanks again jeremy formotto. your one of the best tuners.

http://img516.imageshack.us/img516/683/dyno4cm5.jpg

btw rpm is off that was 6450 not 6960

Very nice numbers. That thing shoud scream at the track!

Ill find out friday when i go to bradenton. I was happy with them. I dyno'd 25 more torque then the 06 z06 that dyno'd after me with a ported intake and ported throttle body he made 470hp and 450 torque so I was really happy.

That's awesome! Let us know how it does friday!

Here is the Dyno Video - http://www.youtube.com/watch?v=mi_uUf4htGw

"96% injector cycle. injectors where almost maxed"

Looking at your AFR I can see why. You should be somewhere in the 12.8 AFR range. You need to lean that thing out. You will pick up a few ponies while you are at it.

actually i wanted to be in the 11.8 range since its supercharged and not n/a

sorry it took so long. just took it to the track today finally. the days i was gonna go before got canceled or something else came up. It ran an 11.443 @ 117.23 with a 1.617 60 ft.

what the hell is he in the backyard with dyno>.>

yo that some back yard shit good numbers though

Good numbers all around man, congrats.

actually that was at the side of a shop in largo florida.

That is on the side of his shop right? I think that I am going to have him tune my car once I get my cam installed! Congrats those are some pretty good numbers.

That was at Ford Speed Racing In Largo, Fl. He tunes at many different places. You just have to call and get a hold of him and set up a date.

nice numbers

nice numbers