Car Got Dyno'd Today
#1
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Oct 2005
Location: Avon Park, Florida
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Car Got Dyno'd Today
Vortech v9-g stock 3.125 pulley
Speed Inc Si 5 cam 231/237 112lsa
Vigilante 3200 stall
3.42 gear ratio
stock bottom end
Pacesetter Headers
Magnaflow Exhaust
42# injectors
in line fuel pump.
96% injector cycle. injectors where almost maxed. jeremy formato tune. 470/475 the videos should be up tonight or tomorrow. Thanks again jeremy formotto. your one of the best tuners.
Speed Inc Si 5 cam 231/237 112lsa
Vigilante 3200 stall
3.42 gear ratio
stock bottom end
Pacesetter Headers
Magnaflow Exhaust
42# injectors
in line fuel pump.
96% injector cycle. injectors where almost maxed. jeremy formato tune. 470/475 the videos should be up tonight or tomorrow. Thanks again jeremy formotto. your one of the best tuners.
Last edited by John2005; 09-14-2009 at 02:23 AM.
#4
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Oct 2005
Location: Avon Park, Florida
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Ill find out friday when i go to bradenton. I was happy with them. I dyno'd 25 more torque then the 06 z06 that dyno'd after me with a ported intake and ported throttle body he made 470hp and 450 torque so I was really happy.
Last edited by John2005; 11-26-2008 at 10:53 AM.
#7
"96% injector cycle. injectors where almost maxed"
Looking at your AFR I can see why. You should be somewhere in the 12.8 AFR range. You need to lean that thing out. You will pick up a few ponies while you are at it.
Looking at your AFR I can see why. You should be somewhere in the 12.8 AFR range. You need to lean that thing out. You will pick up a few ponies while you are at it.
Trending Topics
#14
TECH Apprentice
Join Date: Jan 2007
Location: Hudson florida
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
That is on the side of his shop right? I think that I am going to have him tune my car once I get my cam installed! Congrats those are some pretty good numbers.