Trickflow's and Vrx5 combo!
 

I got my car back today from StraightLine and would like to say I am one happy customer AS usual!
I bought some trickflow 220cc as cast heads milled to 60cc's for a comp ratio of 11.0 and a VRX5 cam from Vengeance Racing and StraightLine put all the stuff together for an as usual good install and SPOT on TUNE!

Mike managed to get me 457 hp and 406 ft lbs of torque at 6500rpm, that stayed flat from 4k to the end of the pull. AFR was pretty much flat at near 13. On a mustang dyno.

I will post the videos of the dyno pulls on friday cause I left it at the shop.

Thanks to the Troll:jest:, Nick and Mike @ StraightLine!

Congrats on the numbers!!!

What intake is on the car?

Ported Fast 90
Sorry mods are in my sig

I didn't even think to look in your sig..lol

Good numbers tho!! TFS as cast heads "doing work"

lol its cool, yea I loved the ride home!

Nice results!!!

wonder what a set of 215's would do? Nice numbers that combo and another from tsp are the ones im lookin at can't make up my mind which to get !

How much of a difference is there between the TFS 215's and the "as cast" trick flow 220 cc heads ??

Either way, nice results.

Troll! LOL, I love it. I think he prefers Quasi Moto better.

I was really impressed with the combo Zec, I'm going to have to drop the hammer and get a different intake so I can make the difference between our cars more! Here comes a Fiber Tuned!

the as cast flow numbers look really really good if you do a search you can see them up against the 215's. As far as power no one has really dynoes the as cast against the 215's, but there is probibly 15-20 rwhp going to the 215.

Nice combo you have their. I would have to say the 215 would give you 10 or so more power. The car is going to be fun:)

Nice numbers. This is through a stock drivetrain?

Here is a video and some scanned pics, which was kinda crapy looking at a monitor but you can hear our blurted reaction LOL!

I could have gotten the runners hogged out and smothed out but the funds began to rapidly diminish!

Pewtermachine, yes this is a stock m6 with an Ls7 clutch, UMI T/A relocator and a T/A cover if its worth anything.

Its kinda hard to pass up on these heads for 1600 with the upgraded Trickflow springs that is good to about .650 I believe, from Vengeance. Next Mod waiting is the walbro fuel pump, then an E/W pump and finally and very needed is a 9in! Hello route 66 with slicks(if their still open) and I will be done! No mas! that's it! enough! Stop it! :jest:

http://i214.photobucket.com/albums/c...h_MVI_5212.jpg

Here are 2 runs minutes apart with the WCF, the second pic is my old set up with stock heads, hotcam, Patriot golds, 1.8 harland sharps and Ported FAST.

http://i214.photobucket.com/albums/c...tle8/dyno1.jpg

2nd pic

http://i214.photobucket.com/albums/c...tle8/dyno2.jpg

NIce results Zeke

nice #'s

nice numbers dude

Thanks Bill and Jim.

Nice numbers.

Nice #! I just picked up the vrx5. heads next year. Something to look forward to!