AFR225's
Thread Starter
Launching!
iTrader: (6)
Joined: Sep 2008
Posts: 257
Likes: 0
From: Cape Girardeau Missouri
AFR225's What kind of results should i expect with a set of AFR225's on top of my 383 ls1? They are milled to 59cc and my compression will be about 12to1. I do not have cam specs but it will be aggressive (as big as i can go that Pat G will suggest). I just read that a guy with PRC 2.5 heads got some good numbers on a mustang dyno. I have an A4 with 3600 stall and 10 bolt at the moment.
Thread Starter
Launching!
iTrader: (6)
Joined: Sep 2008
Posts: 257
Likes: 0
From: Cape Girardeau Missouri
yes, all supporting mods, sorry forgot to add that stuff, going to have duel cutouts are the headers instead of at the Y where i have it now. how are people getting 480+ i wonder?
I made 463hp 414tq with afr 205 heads on a 346ci ls1,m6 car. Also,i was on a mustang dyno that i lost 25hp on when i went to it from a dynojet. You with the RIGHT set up should get 450hp to 460-ish-hp. Match your intake,cam and heads and you will have a fast car.
Last edited by mike c.; Mar 23, 2011 at 05:37 PM.
I made 470 hp/ 440 TQ , with old LPE 243's heads, FAST 90 unported, 23x/24x cam. Tune was suspect though as far as timing.
You should be somewhere in the 450-480 range easy.
You should be somewhere in the 450-480 range easy.
On The Tree
Joined: Jun 2010
Posts: 122
Likes: 1
You should send the heads to Tony and let him work his magic on them. Take a look at my sig. I made 484/412 threw cats with a 346 and afr 205's and supporting bolt on's.
