Low numbers on dynojet
Thread Starter
On The Tree
Joined: Aug 2010
Posts: 136
Likes: 0
From: vicksburg ms
Low numbers on dynojet Hey guys I took my 00 ws6 to the dyno yesterday and made 2 pulls I only made 308hp and 348tq with mid length headers ory borla catback and a lid my car is a 2000 ws6 m6 runs great feels really strong just seems a little low to me
it all depends on what it dyno'd before the mods it also depends on the tune. Get long tubes, pulley, replace the ls1 intake with at least a ls6 intake unless you are planning on some internal mods later... if so get a fast intake, 3" Y pipe from the headers to the borla, and youll see decent bolt on results.
or you can get about the same or more from adding a 224ish cam pkg, and injectors to what you have. Either will require a tune.
Your torque number is nice and you said it feels good so thats the MAIN objective...
or you can get about the same or more from adding a 224ish cam pkg, and injectors to what you have. Either will require a tune.
Your torque number is nice and you said it feels good so thats the MAIN objective...
Good torque though.
It depends on the dyno. Mine did almost 340rwh on one dyno then the next 326rwh so who knows.
When my car only had lid, and borla catback, it did 320rwh on one dyno and the next did 315rwh.
The real test is the track
It depends on the dyno. Mine did almost 340rwh on one dyno then the next 326rwh so who knows.
When my car only had lid, and borla catback, it did 320rwh on one dyno and the next did 315rwh.
The real test is the track
