Bolt On 6spd 2000 Z28
Thread Starter
On The Tree
Joined: Oct 2008
Posts: 179
Likes: 0
From: CT
Bolt On 6spd 2000 Z28 Went to the dyno on sat. heres a quick run down of the car.
2000 z28 122,000 miles 6 speed
Longtubes, offroad y pipe, catback, lid, 3.90 gears, slp clutch and flywheel. Not sure if it has ever been tuned. It put down 335hp 342tq, a/f was 11.9 across the board. This was also on the stock ls1 intake. So im planning on doing an intake swap and tuning i think theres still some power to be had. This was on a dynojet btw.
2000 z28 122,000 miles 6 speed
Longtubes, offroad y pipe, catback, lid, 3.90 gears, slp clutch and flywheel. Not sure if it has ever been tuned. It put down 335hp 342tq, a/f was 11.9 across the board. This was also on the stock ls1 intake. So im planning on doing an intake swap and tuning i think theres still some power to be had. This was on a dynojet btw.
You'll pick up some power when you use a little less fuel...you're probably going to be surprised, the difference in power on an LS1 from that to something more like 12.7-12.8:1 is pretty noticeable.
