Base Tune Numbers seem off to me...
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Base Tune Numbers seem off to me...
Okay so my mods are in my sig and im running an unlocked 3800 stall that flashes to 5k. This was a stock intake and TB dyno just to get my AFR right until i have time to get back for a full tune. My car made 348hp/445tq with 2.73's and 12.4 AFR. Dyno graphs looked fine to me and the tuner. This was on a mustang dyno too. Numbers seem odd to me, even though its still a base tune, still seems like my torque is WAY high and my horsepower is kinda low...
#2
11 Second Club
iTrader: (18)
The mustang dyno combined with unlocked converter are going to show low HP. The high torque is most likely a spike resulting from the converter flash.
If it's a 3800 converter but flashes to 5k it sounds like it could be pretty loose which will also eat up HP pretty bad.
If it's a 3800 converter but flashes to 5k it sounds like it could be pretty loose which will also eat up HP pretty bad.
#3
Launching!
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Okay that makes more sense. I mean the car runs good! Just the numbers seemed off... It was door to door with a 500whp terminator so im not upset by its performance at all!
Thanks for the info!
Thanks for the info!