Another Dyno Gain Estimate
Thread Starter
12 Second Club
Joined: Aug 2003
Posts: 270
Likes: 0
From: Chicago IL
Another Dyno Gain Estimate Allright, hopefully I will be putting my car on the rollers Saturday @ Speed Inc again and hopefully I will see some nice gains. 
Here is my first & last dyno graphy (312hp / 330ft-lbs)
At the time of this run, I only had the K&N as far as engine mods go.
Since then I have added:
-Kooks 1 3/4 Headers & ORY
-160* thermostat & fan switch (in hopes of stopping KR)
-NGK55 Plugs & Taylor Wires
-SLP Smootbellows
-Home Ported Throttlebody
Also I just noticed a large drop at 4300RPMs is that from the KR?
Here is my first & last dyno graphy (312hp / 330ft-lbs)
At the time of this run, I only had the K&N as far as engine mods go.
Since then I have added:
-Kooks 1 3/4 Headers & ORY
-160* thermostat & fan switch (in hopes of stopping KR)
-NGK55 Plugs & Taylor Wires
-SLP Smootbellows
-Home Ported Throttlebody
Also I just noticed a large drop at 4300RPMs is that from the KR?
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
280/265 
:beer:
Those numbers definetly sound realistic, I don't think you'd have a problem hitting or surpassing them ... damn 6 speed guys
Not sure if that is KR dropping you down at 4300 ... A/F looks like , if anything a tad rich, we'll see
:beer:Those numbers definetly sound realistic, I don't think you'd have a problem hitting or surpassing them ... damn 6 speed guys
Not sure if that is KR dropping you down at 4300 ... A/F looks like , if anything a tad rich, we'll see
