Cam only dyno
#1
Cam only dyno
I'll post a graph as soon as I can.
This is a 2002 WS6 M6.
She just made 426 rwhp and 393 rwtq.
Mods
LSX 90mm TB and Manifold
PPC 1 3/4 LT Headers into a 3" y setup
No cat's
Corsa Exhaust
No cutout
Electric water pump
ASP underdrive pulley
a stock 10 bolt
heavy *** 17x11 TT2 wheels with KD 315's
Comp cams 921 dual springs
Molly pushrods
LS6 ported oil pump
Dual timing chain
and a 232/235 @ .050", .596"/.599", 112 LSA on an XE-R lobe cam
Before the cam and EWP and 90mm setup it dynoed 356 rwhp and 364 rwtq.
The cam package was installed at Dynotech Engineering and tuned by Phil. Awesome shop.
Edit
Added Graph
This is a 2002 WS6 M6.
She just made 426 rwhp and 393 rwtq.
Mods
LSX 90mm TB and Manifold
PPC 1 3/4 LT Headers into a 3" y setup
No cat's
Corsa Exhaust
No cutout
Electric water pump
ASP underdrive pulley
a stock 10 bolt
heavy *** 17x11 TT2 wheels with KD 315's
Comp cams 921 dual springs
Molly pushrods
LS6 ported oil pump
Dual timing chain
and a 232/235 @ .050", .596"/.599", 112 LSA on an XE-R lobe cam
Before the cam and EWP and 90mm setup it dynoed 356 rwhp and 364 rwtq.
The cam package was installed at Dynotech Engineering and tuned by Phil. Awesome shop.
Edit
Added Graph
Last edited by SOM WS6; 10-08-2004 at 09:56 AM.
Trending Topics
#10
DTE pretty much designed the cam but I am sure since it is a Comp grind that you can copy it. The EWP has maybe 3000 miles on it sofar. Bought it over a year ago. Not real sure on the ICL I hope to have a graph I can post up within a day.
Thanks guys
Thanks guys
#12
TECH Apprentice
iTrader: (1)
Join Date: May 2002
Location: Indiana
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
ya phil is pretty good with ls1edit. he got me to 346rwhp with stock manifolds. next is a cam swap & longtubes. then im back for more tuning. more than likely ill go with a 231/237 cam.