Just got dyno'ed with a dynomite
06-27-2005, 05:36 PM
#1
On The Tree
Thread Starter
Join Date: May 2004
Location: the 770!
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Just got dyno'ed, are these good numbers for A4 convertible? I'm very pleased with the numbers. All the runs were done on a DYNOmite dyno. Peak hp was around 320 and peak torque was about the same at 4750rpm on the first run. As you will see it kinda spiked at the end, so im not going to count that. It pulled a good 305hp before the spike.
The second run was about the same: 319 peak hp at the spike and around 305hp again before the spike. Around 325 tq at 4250 rpm:
The graphs are really light, couldnt quite get the scanner to work right but tell me what you guys think. I know there is more hp to be gained judging from the air to fuel, but I just thought I would see what you guys thought.
Mods are: Ls1 Motorsports Air Lid and Magnaflow catback exhaust
The second run was about the same: 319 peak hp at the spike and around 305hp again before the spike. Around 325 tq at 4250 rpm:
The graphs are really light, couldnt quite get the scanner to work right but tell me what you guys think. I know there is more hp to be gained judging from the air to fuel, but I just thought I would see what you guys thought.
Mods are: Ls1 Motorsports Air Lid and Magnaflow catback exhaust
Last edited by WS6VERT; 06-28-2005 at 10:38 AM.
