Dyno #'s in before/after mods
Thread Starter
Launching!
Joined: Aug 2004
Posts: 284
Likes: 0
From: British Columbia, Canada
Dyno #'s in before/after mods Well, just had a few parts installed on my 01 TA WS6. Figured I would share my info as I find it interesting when other people post what works and what doesn't. All runs made on a Dynojet Chassis Dyno.
Baseline (Stock as stock can be). 318RWHP/331RWTQ
After Mods: 348 RWHP/365 RWTQ
Not bad for these mods, sounds wayyyyyyyyyyyyyy better too, they way a car should sound.
Baseline (Stock as stock can be). 318RWHP/331RWTQ
After Mods: 348 RWHP/365 RWTQ
Not bad for these mods, sounds wayyyyyyyyyyyyyy better too, they way a car should sound.
Last edited by soontobeLS1; Aug 15, 2005 at 07:04 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by OdessitPashka
only 30whp and 34tq after LTs, ORY, Catbacl, Lid, and tune?
Is it just me, or it's not that much of a gain... I'd expect full exhaust give at least 35-40whp.
Is it just me, or it's not that much of a gain... I'd expect full exhaust give at least 35-40whp.
Well, the numbers that he has right now are pretty good, BUT I don't think that 30whp gain after all the work he's done is decent. I lot of people gain 20whp just from LID and a catback, but then again he had good numbers to start with. Maybe he had a SLP stuff on his car stock?
Thread Starter
Launching!
Joined: Aug 2004
Posts: 284
Likes: 0
From: British Columbia, Canada
That's exactly it.....They are bolt ons to help the engine breath....When ya do heads etc...That' s a whole different story as you are changing the mechanics of the engine. It feels a lot better in the seat of the pants meter...First gear feels like it actually wants to break my tires loose, and going around corners in second gear it's easier to spin em. The shift light is a good idea too. My recommendations of these mods as being the first on any stock car. Of course, it's all I could afford.
Those numbers are inline with stock LS1 car, Here is the dyno for my wife's 00 Z28 the only non-stock part is a K&N filter.
http://i6.photobucket.com/albums/y20.../05Z28Dyno.jpg
Your car probably has a bit more potential once you start to get the intake and exhaust freed up. Because you have a LS6 intake. But otherwise your numbers look good.
http://i6.photobucket.com/albums/y20.../05Z28Dyno.jpg
Your car probably has a bit more potential once you start to get the intake and exhaust freed up. Because you have a LS6 intake. But otherwise your numbers look good.
