Torquer 2 on LS2 Vette
06-15-2006, 07:48 AM
#1
Launching!
Thread Starter
Join Date: Oct 2004
Location: PA
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Torquer 2 on LS2 Vette My buddy finally had his dyno fixed, I rushed up to test the mods.
Cam only..418.29RWHP 385.26 Torque
I swapped on a ported intake in about 14 minutes (to avoid cooldown), and came up with 425.83RWHP and 392.63 Torque
That is 43 RWHP from the cam and an additional 7.5 RWHP and 7.5 Torque from the porting.
Those are Peak Numbers on the Porting, don't be fooled, it picked up 3-13 HP/Torque with an average of about 10 throughout the entire curve That's good money spent, worth at least a tenth or two on the track.
Cam Only...
Intake Porting
Cam only..418.29RWHP 385.26 Torque
I swapped on a ported intake in about 14 minutes (to avoid cooldown), and came up with 425.83RWHP and 392.63 Torque
That is 43 RWHP from the cam and an additional 7.5 RWHP and 7.5 Torque from the porting.
Those are Peak Numbers on the Porting, don't be fooled, it picked up 3-13 HP/Torque with an average of about 10 throughout the entire curve That's good money spent, worth at least a tenth or two on the track.
Cam Only...
Intake Porting
