Wondering what the Miata will be putting down.
#1
Teching In
Thread Starter
Join Date: Dec 2004
Location: Winchester, California
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Wondering what the Miata will be putting down.
Alright guys. I am hoping for somewhere around 430rwhp. Actually hoping for more but I doubt I'll get it. Mods are in the sig. This thing will be set up just like a M6 C5 only with a shortened torque tube, 3.42's, and shortened halfshafts. My wheels will be 13.7 lbs each and I'll be running 555R's. Once this gets done I will be Calling up the boys at Livernois to see if they can help me out with a tune so you can figure that into my list of mods. Any of your comments, info, or criticism is appreciated. I wish now that I would have gotten a bigger cam. The only thing now is that I don't have the funds to just swap it out. Anyways, let me know what you think.
Unfortunately this will probably not be out this year but I am getting pretty freakin' excited and just felt like posting something.
Unfortunately this will probably not be out this year but I am getting pretty freakin' excited and just felt like posting something.
#3
Teching In
Thread Starter
Join Date: Dec 2004
Location: Winchester, California
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I am not doing it myself, a friend is doing it for me but I know that for the motor itself there is not a lot of cutting inorder to fit it in the miata. We cut out about 3" back and something like 4 to 6" tall. and it fits very well. as far as the trans etc. there is quite a bit of work that hasn't been started yet.