STOCK LS1 dyno numbers
Thread Starter
On The Tree
Joined: Mar 2007
Posts: 137
Likes: 0
From: Austin, Tx
STOCK LS1 dyno numbers First of all its a stock LS1/T56 in a '84 Z28..Stock intake, exhaust manifolds, cam, heads, etc..ALL STOCK. the rear is a 3.42 posi setup with 17" wheels all around.
318 rwhp at about 5500 rpm
348 rwtq at about 4100 rpm
I don't know the AFR numbers and the pull was on a mustang dyno.
What do yall think?
The torque was over 300 at 2000 so I was happy with that. But the hp fell off early eh?
318 rwhp at about 5500 rpm
348 rwtq at about 4100 rpm
I don't know the AFR numbers and the pull was on a mustang dyno.
What do yall think?
The torque was over 300 at 2000 so I was happy with that. But the hp fell off early eh?
Holy **** 318/348 on a mustang dyno in a stock ls1, thats awesome!!! Thats a factory monster right there. Start modding that bitch!!!
The power fell of a bit early most likely because it has an LS1 intake on it, if you get an LS6 intake it will keep pulling up top.
The power fell of a bit early most likely because it has an LS1 intake on it, if you get an LS6 intake it will keep pulling up top.
