Guess my #'s?
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Oct 2003
Posts: 586
Likes: 0
From: Holly Springs, NC
Guess my #'s? Going in for a cam and verter install next week and wanted to see what you guys thought for some dyno #'s. I got a figure in mind but wanted to see other opinions. I will probably start a new thread with the results when I get them later next week.
2000 Camaro SS A4
Mods:
Fast 90, 90mm TB, FLP headers and O/R Y-pipe, SLP dual/dual catback, SLP Blackwing lid, cam: 231/240 .644/.608 112lsa, TCI 4000 stall, and SLP underdrive pulley(hopefully, if it arrives in time).
2000 Camaro SS A4
Mods:
Fast 90, 90mm TB, FLP headers and O/R Y-pipe, SLP dual/dual catback, SLP Blackwing lid, cam: 231/240 .644/.608 112lsa, TCI 4000 stall, and SLP underdrive pulley(hopefully, if it arrives in time).
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Oct 2003
Posts: 586
Likes: 0
From: Holly Springs, NC
Wow, no guesses, huh?
Well just for an update the car made 325ish rwhp with the above bolt on's except the U/D pulley through the stock stall, unlocked, still with the stock tune. The cam is now in and valve springs going on as we speak. I will also be switching out the catback for a true dual setup.
Well just for an update the car made 325ish rwhp with the above bolt on's except the U/D pulley through the stock stall, unlocked, still with the stock tune. The cam is now in and valve springs going on as we speak. I will also be switching out the catback for a true dual setup.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Oct 2003
Posts: 586
Likes: 0
From: Holly Springs, NC
