New Dyno #s
New Dyno #s w/ Speed Inc SI5 (231/237) I got my car tuned @ Speed Inc today, as always, everything is perfect with the tune! A big thanks to the guys @ the shop!!! The car drives perfect & I am happy with the numbers.
My car is a '99 Camaro SS, A4 with a 3500 stall, 3.73 gears, Speed Inc SI5 cam, TEA 5.3 stage 1.5 heads, LS6 manifold, long tubes, off road y w/ cutout, SLP crank pulley, SVO 30# injectors, Racetronix intank pump w/wire kit and a few other minor mods...
420hp/388tq (Too bad I need the good heads to make the same #s as a stock headed M6
)
The car went 11.70s NA last year, it made 402hp then, so I might be able to improve.
My car is a '99 Camaro SS, A4 with a 3500 stall, 3.73 gears, Speed Inc SI5 cam, TEA 5.3 stage 1.5 heads, LS6 manifold, long tubes, off road y w/ cutout, SLP crank pulley, SVO 30# injectors, Racetronix intank pump w/wire kit and a few other minor mods...
420hp/388tq (Too bad I need the good heads to make the same #s as a stock headed M6
)The car went 11.70s NA last year, it made 402hp then, so I might be able to improve.
Last edited by Unstang; May 30, 2007 at 06:24 PM.
Nice numbers! I had similar results with a similar setup last week. Mine made 421/377 but I've got the TEA 1.5 853s. I think this is the bottle neck of this motor, but hey if it will go out and run the number I'll be happy! What was your raceweight, trap speed, and DA on the 11.70 pass from before? I had my doubts about this TCI 3500 convertor, but it might be enough afterall...
Originally Posted by 02EBZO6
What was your raceweight, trap speed, and DA on the 11.70 pass from before?
