Heres my stock Dyno Vid. I think I pulled good numbers, what do you all think? Dyno'd on a Dyno Dynamics.

http://youtube.com/watch?v=es6ve2HnWfw

This was done about a month ago in tepms that were 100+ with the humidity in the 70%-80% range.

 

NO! that is a little below average! is it a M6 or A4?

 

A4. I run 13.50s in the quarter so even if they are low, i'm happy. Wouldn't the temp and humditiy have something to do with that.

 

looks prutty good for a stock A4 to me...

 

Actually, I think those are good numbers for a bone stock formula. Very strong in my opinion

 

are you sure they didn't adjust for temperature and humidity?

otherwise...
http://wahiduddin.net/calc/calc_hp.htm
looks like your 295 could be 310+ in better weather

 

mine dynoed 327rwhp 343 rwtq 02' WS6 A4 with just a lid and cutout in 90* Texas heat and humidty!

 

I would not be using that particular dyno again. High RPM with the pan titling forward and down is a recipe to starve the oil sump pickup and kill some bearings in a hurry.

 

why did he only make the pull only up to 5460 rmps?????? isnt the stock redline 6200????

 

Those are good numbers for a A4.... As long as she runs good to you, thats all that matters anyways.

 

thats a dyno dynamics and supposedly that is the absolute in dyno technology. thats what ive always used and its never caused any problems. however it could be mounted in the ground with concrete work (good idea).

anyways they tend to show conservative numbers so that is a great run for stock. most stock f bodies here show 270-285rwhp. nice looking car by the way!!!

 

nice numbers...