Dyno Guesses & Bench Racing Forum Horsepower Estimates | Racing Scenarios

1/4 guesstimates

Thread Tools
 
Search this Thread
 
Old May 14, 2010 | 02:02 PM
  #1  
Quik Sand's Avatar
Thread Starter
TECH Regular
iTrader: (6)
 
Joined: Jan 2009
Posts: 454
Likes: 0
From: Edmond, Ok
Default 1/4 guesstimates

99 TA M6

v2
Mac mids
LS6 intake
Lid
ASP
BMR LCA's, Panhard
3.73's

401 HP / 389 TQ

Wanting to see what you experts think it could be capable of on good tires. More gear to hit 11's?
Reply
Old May 16, 2010 | 11:30 PM
  #2  
Quik Sand's Avatar
Thread Starter
TECH Regular
iTrader: (6)
 
Joined: Jan 2009
Posts: 454
Likes: 0
From: Edmond, Ok
Default

anybody?
Reply
Old May 17, 2010 | 07:13 PM
  #3  
demarco313's Avatar
TECH Apprentice
 
Joined: Jan 2009
Posts: 375
Likes: 0
From: Michigan
Default

low 12's or high 11's depending on driver mod. Thats a pretty good setup.
Reply
Old May 18, 2010 | 12:23 AM
  #4  
itsslow98's Avatar
TECH Senior Member
iTrader: (18)
 
Joined: Apr 2006
Posts: 6,762
Likes: 5
From: Maryland
Default

its all in the first 60', if you pull a good 60' and dont break anything then you should be damn close to 11s. But from what ive seen its hard to get consistent 60's out of an m7 with stock 10 bolt.
Reply




All times are GMT -5. The time now is 01:50 AM.