60ft time?
60ft time? What kind of 60ft could I expect out of my car? I will be full weight, full interior.
I have an S60 going in with 3.73 gear and strange 3" chromoly driveshaft. Also have a Mcleod Rxt so clutch dumping shouldn't be a problem. Mods in sig. Will be running a 26x11.5x15 Hoosier drag radial. Suspension will consist of UMI tunnel mounted torque arm, on car adjustable panhard bar, lower control arms, tubular sub frame connectors and stock springs and shocks. Just wanting to know what to expect. Will be doing heads/cam and nitrous next year..
I have an S60 going in with 3.73 gear and strange 3" chromoly driveshaft. Also have a Mcleod Rxt so clutch dumping shouldn't be a problem. Mods in sig. Will be running a 26x11.5x15 Hoosier drag radial. Suspension will consist of UMI tunnel mounted torque arm, on car adjustable panhard bar, lower control arms, tubular sub frame connectors and stock springs and shocks. Just wanting to know what to expect. Will be doing heads/cam and nitrous next year..
10 Second Club
Joined: Jan 2010
Posts: 2,317
Likes: 20
From: Hurley, VA
A full weight, bolt on M6 car, I would be satisfied with high 1.6s. On a radial with a M6 and not ALOT of practice I would realistically expect 1.8s on a good run. With the mods you listed heads/cam/nitrous you shouldn't have a problem pulling 1.50s but its gonna be more involved with a radial. I prefer a biasply for a stick car.
