WTB list, please help...
WTB list, please help... I finally got around to making a list of some of the items I am going to need to complete my swap. I am posting this in the local area because I don't use paypal...hence not really having a way to pay for long distance items. Not to mention, I prefer local face to face deals anyways...
With that being said...I am located in Springfield, MA. I don't mind traveling a little ways for the items listed. I also have several classified adds here, so maybe trades could be worked out on some of the items. Regardless...here is my list...
-F-Body LS oil pan (windage tray, pick-up and etc if it differs from the truck setups.). I have a complete L92, and I need the full setup so I can swap my truck pan.
-F-Body LS Long Tube Headers I dont really care too much about the brand. I would prefer a set of "race" headers without the emissions provisions, but if they have the emissions stuff...no big deal.
-Adj Panhard Bar Looking for a rod-end adj unit.
-L92 Carburetor Intake Manifold Must be for the ls3/l92 rectangular intake ports...NOT cathedral style. Again, don't really care about brand...e-brock or GMPP is fine...
-Griffin Radiator The infamous griffin that all the f-body guys use. Maybe you have one laying around from a parts car?
-VVT Timing Cover/ Cam Gear DELETE (ls3?) I need the correct cover and the 3 bolt cam gear to swap out the VVT
...These are just a few items I am looking for....
If I have to go out and buy them new its not the end of the world, but I figured might as well try the locals first lol.
Thanks guys!
With that being said...I am located in Springfield, MA. I don't mind traveling a little ways for the items listed. I also have several classified adds here, so maybe trades could be worked out on some of the items. Regardless...here is my list...
-F-Body LS oil pan (windage tray, pick-up and etc if it differs from the truck setups.). I have a complete L92, and I need the full setup so I can swap my truck pan.
-F-Body LS Long Tube Headers I dont really care too much about the brand. I would prefer a set of "race" headers without the emissions provisions, but if they have the emissions stuff...no big deal.
-Adj Panhard Bar Looking for a rod-end adj unit.
-L92 Carburetor Intake Manifold Must be for the ls3/l92 rectangular intake ports...NOT cathedral style. Again, don't really care about brand...e-brock or GMPP is fine...
-Griffin Radiator The infamous griffin that all the f-body guys use. Maybe you have one laying around from a parts car?
-VVT Timing Cover/ Cam Gear DELETE (ls3?) I need the correct cover and the 3 bolt cam gear to swap out the VVT
...These are just a few items I am looking for....
If I have to go out and buy them new its not the end of the world, but I figured might as well try the locals first lol.
Thanks guys!
