Modified V-Band Shorty Headers for Turbo!
These things are brand new and have never been run. I started with a set of Dougs 98-99 fbody shorty headers. I removed all the emissions bs, welded up the holes, smoothed everything out and had 2.5" stainless v-bands professionally tig welded on. Included is the other half of the v-band assemblies so you can customize your own turbo cross-over. This is a FAR more attractive setup in comparison to the typical truck manifolds. Also, the tig was finished all the way around the outside of the exhaust flange (from the factory Dougs only welds the top and bottoms)
1-5/8 primaries with 2.5" collectors!
350.00


Trending Topics
The Best V8 Stories One Small Block at Time






