FS: 1999 Camaro Z28*
I am in some serious debt trouble right now and need to unload anything I truely don't need right now.
I am selling my Red 99 Camaro Z28 T Top M6She has about 79-80k miles on the clock
I have fresh pacesetter headers, fresh pacesetter ORY pipe to replace the beat up ones currently installed. As well as the shim kit for a 10 bolt rebuild with 3.90 Motive gears to go in.
Theres ticking noise on the passenger side head. The oil pressure is still holding strong so we are thinking bent pushrod or a rocker issue but I have no time/energy/resources to address this stuff.
Some of the mods:
TSP 235/240 Tsunami Cam
Harland Sharp Rockers
Comp Cams Pushrods
Comp Cams Lifters
241 Heads with Dual Gold Springs and Retainers
FAST 78mm intake manifold
80MM Throttle Body
1 3/4" Pacesetter Longtubes
3" Pacesetter ORY pipe
Dynomax 3" Intermediate pipe
Magnaflow muffler
Summit Racing electric cutout (not installed)
SLP Lid
K&N filter
Smooth Bellow
Descreened MAF
Walbro 255 pump
FAST 60lbs Injectors
Hotwire kit
Spec 3+ Clutch
Pro5.0 Shifter with short stick
Poly Motor Mounts and tranny mount
PCMforLess Mail Order tune by Bryan
AGX KYBs,
Eibach front springs,
BMR Rear springs,
BMR Subframe Connectors,
Drilled Slotted Rotors
Black RS center spoiler, Blacked out tails & signals, Hurst leather wrapped shift ****, Black suede w/ red stitching bucket seats, rear window is limo tinted, Red 4 point harnesses, AEM Uego, Autometer fuel pressure gauge, 6k HIDs
A decent amount of weight reduction was done to the car:
Cut front bumper beam
Jack and spare removed
Carpeting removed
rear seats removed
A/C removed
Speakers removed
Head Unit removed
I am looking to get 6k with the extra parts. I will also throw in 853 heads if you want to port/polish them.
Keep in mind it's been garage kept, barely driven - needs a good home!
I am located in Central CT, my number is 86o-97764oneone








I am selling my Red 99 Camaro Z28 T Top M6She has about 79-80k miles on the clock
I have fresh pacesetter headers, fresh pacesetter ORY pipe to replace the beat up ones currently installed. As well as the shim kit for a 10 bolt rebuild with 3.90 Motive gears to go in.
Theres ticking noise on the passenger side head. The oil pressure is still holding strong so we are thinking bent pushrod or a rocker issue but I have no time/energy/resources to address this stuff.
Some of the mods:
TSP 235/240 Tsunami Cam
Harland Sharp Rockers
Comp Cams Pushrods
Comp Cams Lifters
241 Heads with Dual Gold Springs and Retainers
FAST 78mm intake manifold
80MM Throttle Body
1 3/4" Pacesetter Longtubes
3" Pacesetter ORY pipe
Dynomax 3" Intermediate pipe
Magnaflow muffler
Summit Racing electric cutout (not installed)
SLP Lid
K&N filter
Smooth Bellow
Descreened MAF
Walbro 255 pump
FAST 60lbs Injectors
Hotwire kit
Spec 3+ Clutch
Pro5.0 Shifter with short stick
Poly Motor Mounts and tranny mount
PCMforLess Mail Order tune by Bryan
AGX KYBs,
Eibach front springs,
BMR Rear springs,
BMR Subframe Connectors,
Drilled Slotted Rotors
Black RS center spoiler, Blacked out tails & signals, Hurst leather wrapped shift ****, Black suede w/ red stitching bucket seats, rear window is limo tinted, Red 4 point harnesses, AEM Uego, Autometer fuel pressure gauge, 6k HIDs
A decent amount of weight reduction was done to the car:
Cut front bumper beam
Jack and spare removed
Carpeting removed
rear seats removed
A/C removed
Speakers removed
Head Unit removed
I am looking to get 6k with the extra parts. I will also throw in 853 heads if you want to port/polish them.
Keep in mind it's been garage kept, barely driven - needs a good home!
I am located in Central CT, my number is 86o-97764oneone








Last edited by sujomatt; Oct 17, 2011 at 07:47 PM.
Trending Topics
I never talk price over the phone or internet.
Just a friendly piece of advice. If they want it, they have $$$ when they show up.
BTW I don't see your add in the Bargain News.... you should get on that.
Just a friendly piece of advice. If they want it, they have $$$ when they show up.
BTW I don't see your add in the Bargain News.... you should get on that.




