2002 LS1 and T56 For Sale
Thread Starter
TECH Senior Member
iTrader: (18)
Joined: Apr 2006
Posts: 6,762
Likes: 5
From: Maryland
I am parting out my 1993 mustang ls1/t56 swap. Have some things that I need to take care of and i dont have the time to make the car into what I want. Im gonna start by listing the motor and trans first, once that sells the swap stuff will follow. The motor and trans and in the car so if you want to hear it run etc it can be arranged. I will need a deposit prior to pulling and a weeks top to get it pulled. On to the details
Motor and trans are out of an 02 camaro with 49k miles. I purchased it through Fran at Race Proven Motorsports they pulled it out of a customers car.
Motor: Made 417/389 through 4.10s and 28" E.T. streets Deposit recieved
-Stock ls6 intake manifold
-Stock TB
-Stock 241 heads with basically new valve springs that came with the EPS cam kit(200 miles of run time tops)
-EPS 234/246 .601/.606 112+2 cam(200 miles tops, installed by RPM)
-Brand New Melling 10296 High Volume Oil Pump
-Brand New LS2 Timing chain
-Brand new SLP 25% U/D
-Brand New CTS-V Oil Pan and pickup
-Brand new Metco Breather
-Refurbished Delphi Alternator(200 miles)
-Brand new starter
-Brand New Waterpump
-Brand new coolant crossover lines
-Brand new Coolant, IAT, Oil Pressure, and Oil level sensors
-Stock MAF
-Low mileage G8 GT coil packs with new MSD plug wires
-New Intake manifold gaskets
-No A/C or Power Steering
-Will not come with wiring harness or motor mounts
-Will include new PCM with RPM tune for $200
Trans: SOLD
-49k mile T56 out of the same camaro
-No grinds, no popping out of gear etc performs flawlessly
-Quicktime SFI bellhousing
-Pro 5.0 Shifter with short stick and hurst leather ****
-Mcleod Original Street Twin Clutch
-Mcleod Master
-Remote Bleeder
Prices are firm:
Motor-$ 3200 Deposit recieved
Trans and clutch $2000
Located in Harford County MD, not willing to ship at the moment. Also not willing to part out motor or trans setup.
http://www.youtube.com/watch?v=bjDGk..._order&list=UL
http://www.youtube.com/watch?v=SEtZT13zvAk
Motor and trans are out of an 02 camaro with 49k miles. I purchased it through Fran at Race Proven Motorsports they pulled it out of a customers car.
Motor: Made 417/389 through 4.10s and 28" E.T. streets Deposit recieved
-Stock ls6 intake manifold
-Stock TB
-Stock 241 heads with basically new valve springs that came with the EPS cam kit(200 miles of run time tops)
-EPS 234/246 .601/.606 112+2 cam(200 miles tops, installed by RPM)
-Brand New Melling 10296 High Volume Oil Pump
-Brand New LS2 Timing chain
-Brand new SLP 25% U/D
-Brand New CTS-V Oil Pan and pickup
-Brand new Metco Breather
-Refurbished Delphi Alternator(200 miles)
-Brand new starter
-Brand New Waterpump
-Brand new coolant crossover lines
-Brand new Coolant, IAT, Oil Pressure, and Oil level sensors
-Stock MAF
-Low mileage G8 GT coil packs with new MSD plug wires
-New Intake manifold gaskets
-No A/C or Power Steering
-Will not come with wiring harness or motor mounts
-Will include new PCM with RPM tune for $200
Trans: SOLD
-49k mile T56 out of the same camaro
-No grinds, no popping out of gear etc performs flawlessly
-Quicktime SFI bellhousing
-Pro 5.0 Shifter with short stick and hurst leather ****
-Mcleod Original Street Twin Clutch
-Mcleod Master
-Remote Bleeder
Prices are firm:
Motor-$ 3200 Deposit recieved
Trans and clutch $2000
Located in Harford County MD, not willing to ship at the moment. Also not willing to part out motor or trans setup.
http://www.youtube.com/watch?v=bjDGk..._order&list=UL
http://www.youtube.com/watch?v=SEtZT13zvAk
Last edited by itsslow98; Dec 18, 2011 at 09:53 PM.
Thread Starter
TECH Senior Member
iTrader: (18)
Joined: Apr 2006
Posts: 6,762
Likes: 5
From: Maryland
Trans is pending sale locally. Bellhousing and clutch master will be for sale seperate however. Motor and trans will be pulled saturday along with some other swap parts like a standalone engine harness and kooks swap headers.
Quicktime SFI Bellhousing(has a hole cut in it by previous owner for inspection purposes i guess.) $300
Mcleod CNC adjustable clutch master $100
Quicktime SFI Bellhousing(has a hole cut in it by previous owner for inspection purposes i guess.) $300
Mcleod CNC adjustable clutch master $100
Thread Starter
TECH Senior Member
iTrader: (18)
Joined: Apr 2006
Posts: 6,762
Likes: 5
From: Maryland
QuickTime bellousing is off the car and ready to go $300+ actual shipping
Psi conversion harness is also ready to go with the optional fbody fan plug ins $400 plus actual shipping
Kooks 1 3/4 fox swap long tubes. Mild steel that I will be sanding and painting with header paint for the buyer. $380+ shipping
Custom made steel driveshaft for ls1 t56 to 8.8. Only 200 miles on it tops. $300+ actual shipping
Deposit on the motor has been received.
Psi conversion harness is also ready to go with the optional fbody fan plug ins $400 plus actual shipping
Kooks 1 3/4 fox swap long tubes. Mild steel that I will be sanding and painting with header paint for the buyer. $380+ shipping
Custom made steel driveshaft for ls1 t56 to 8.8. Only 200 miles on it tops. $300+ actual shipping
Deposit on the motor has been received.


