Drag Wheel & Tire Setup
Thread Starter
TECH Regular
iTrader: (28)
Joined: Oct 2008
Posts: 483
Likes: 1
From: Laurel, Maryland
Drag Wheel & Tire Setup Selling my entire drag racing setup for my Trans Am...wheels, tires, lug nuts, tubes, and screws.
Wheels are Weld Racing Prostars w/ centercaps...15x10 w/ 7.5" backspacing and 15x3.5" w/ 1.875" backspacing and 5x4.75" bolt pattern.
Rears: http://www.summitracing.com/parts/wl...0284/overview/
Fronts: http://www.summitracing.com/parts/wl...4272/overview/
Tires are Mickey Thompson 28/10.5/15 ET Drags and 26/4.5/15 ET Fronts. All have only a few (less than five) passes on them. Rears also come with tubes and bead-lock screws.
Rears: http://www.summitracing.com/parts/mtt-3055
Fronts: http://www.summitracing.com/parts/mtt-3007
Tubes: http://www.summitracing.com/parts/mtt-9553
Rear Lug Nuts (1/2-20 RH): http://www.summitracing.com/parts/wl...1426/overview/
Front Lug Nuts (12mm x 1.50 RH): http://www.summitracing.com/parts/wl...1422/overview/
Tire Screws: http://www.summitracing.com/parts/mrg-4318/overview/
To buy this entire setup new would cost you over $1700.
I'm selling everything complete (mounted and balanced) for $1200.
Located in Laurel, MD. I will ship at buyers expense.
Wheels are Weld Racing Prostars w/ centercaps...15x10 w/ 7.5" backspacing and 15x3.5" w/ 1.875" backspacing and 5x4.75" bolt pattern.
Rears: http://www.summitracing.com/parts/wl...0284/overview/
Fronts: http://www.summitracing.com/parts/wl...4272/overview/
Tires are Mickey Thompson 28/10.5/15 ET Drags and 26/4.5/15 ET Fronts. All have only a few (less than five) passes on them. Rears also come with tubes and bead-lock screws.
Rears: http://www.summitracing.com/parts/mtt-3055
Fronts: http://www.summitracing.com/parts/mtt-3007
Tubes: http://www.summitracing.com/parts/mtt-9553
Rear Lug Nuts (1/2-20 RH): http://www.summitracing.com/parts/wl...1426/overview/
Front Lug Nuts (12mm x 1.50 RH): http://www.summitracing.com/parts/wl...1422/overview/
Tire Screws: http://www.summitracing.com/parts/mrg-4318/overview/
To buy this entire setup new would cost you over $1700.
I'm selling everything complete (mounted and balanced) for $1200.
Located in Laurel, MD. I will ship at buyers expense.
Thread Starter
TECH Regular
iTrader: (28)
Joined: Oct 2008
Posts: 483
Likes: 1
From: Laurel, Maryland
FYI...if you have stock thread pattern rear lugs (12mm x 1.50 RH) you'll need to buy lug nuts to fit them. I'll knock $20 off the price and I'll just keep the 1/2-20 RH nuts for my next setup.
