This is a complete set of Turbo Technology hot parts for an LTx. The original setup would use a stock passenger side exhaust manifold but I upgraded to an SLP dual cat stainless header, will include the driver side header as well. Also, the kit comes from TT with a 2.5" downpipe, this has been upgraded to a 3" pipe with integrated cutout. Comes with everything in the pic except the airdam in the upper left hand corner of the pic. This kit with a T67 turbo ar 12psi on a 383 made 630rwhp and 720rwtq. $1200 + shipping. I also have the T67 turbo if interested. Pics here..

https://ls1tech.com/forums/showthrea...599&highlight=

2 Garrett T60-1 turbos. I never used them and I'm just looking to get what I paid for them. $1000+shipping

Truck manifolds for LS turbo setup $75+ shipping or added to the Garretts above for a total of $1050+ shipping.

Pete Z bars sold

GM forged 3.48 stroke 1 piece rear seal crank gen 1 SBC or LTx. NIB $700+ shipping

1 set of 5.7" Oliver rods for gen 1 SBC or LTx. NIB $700+ shipping

Crank and rods together for $1200+ shipping

Tall GM aluminum valve covers with PONTIAC etched into them for gen1 SBC/LTx. I also have the aluminum adapter plates to convert from centerbolt to perimeter bolt. Paid $250 for the VCs and $150 for the adapters. These have never been used, only out of the box 3 times. Selling for $300 shipped with all hardware.

I am located in Baltimore, Md. and I prefer meeting up with someone local. Also, if none of the LT1 stuff goes I will NOT be selling the T60-1s and truck manifolds. I'm trying to get a good amount of scratch together to buy a pre-fabbed turbo kit. Thanks guys,

Larry