Z06 time!!!!!!!!!!!!!!!!!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
TECH Enthusiast
Joined: Apr 2005
Posts: 678
Likes: 0
So you just ported the Eaton.... What Stg port?
I had a Stg4 ported Eaton/Plenum/Throttle Body on my 03 Cobra with full exhaust and intake and I made 531rwhp/493rwtq out of it.... In 44* weather.
Unless you have some extensive weight reduction.... I dont see you running with the z06.... On spray that is.
I have a 01 Z06 with a CAI only as well and it only made 362rwhp and my Cobra only pulls about 4 cars on it, so....
Good luck man!!!
I had a Stg4 ported Eaton/Plenum/Throttle Body on my 03 Cobra with full exhaust and intake and I made 531rwhp/493rwtq out of it.... In 44* weather.
Unless you have some extensive weight reduction.... I dont see you running with the z06.... On spray that is.
I have a 01 Z06 with a CAI only as well and it only made 362rwhp and my Cobra only pulls about 4 cars on it, so....
Good luck man!!!
So you just ported the Eaton.... What Stg port?
I had a Stg4 ported Eaton/Plenum/Throttle Body on my 03 Cobra with full exhaust and intake and I made 531rwhp/493rwtq out of it.... In 44* weather.
Unless you have some extensive weight reduction.... I dont see you running with the z06.... On spray that is.
I have a 01 Z06 with a CAI only as well and it only made 362rwhp and my Cobra only pulls about 4 cars on it, so....
Good luck man!!!
I had a Stg4 ported Eaton/Plenum/Throttle Body on my 03 Cobra with full exhaust and intake and I made 531rwhp/493rwtq out of it.... In 44* weather.
Unless you have some extensive weight reduction.... I dont see you running with the z06.... On spray that is.
I have a 01 Z06 with a CAI only as well and it only made 362rwhp and my Cobra only pulls about 4 cars on it, so....
Good luck man!!!
I'm just trying to take it easy, I'm trying not to ruin the car by going too far. its holdin up in my old mans car without spray, but he is 460-480 at the tire. i dont like the chatter, clatter etc of the couple others i tried. and for the amount im going to juice it, it should be ok. my stock ls6 clutch lasted 20,000 without spray and 3,000 with spray, and even now i can get 4-5 highway runs out of it. thats with no sticky tires tho.
Just for the time to put a clutch in a C5,I would waste it on a LS7 clutch.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
ive driven a bunch of spec cars, i drove a buddys SC vett with a mccloud in it, (he had that taken out and put an ls7 in because he couldnt stand it. my other buddys sc Z06 has a spec and i dont want to do that to my car, the chatter, traffic conditions etc it sucks. have been out of the clutch game for a while. anyone making anthing with stock feel that will hold power?
Teching In
Joined: Dec 2008
Posts: 8
Likes: 0
From: Peabody, MA
ive driven a bunch of spec cars, i drove a buddys SC vett with a mccloud in it, (he had that taken out and put an ls7 in because he couldnt stand it. my other buddys sc Z06 has a spec and i dont want to do that to my car, the chatter, traffic conditions etc it sucks. have been out of the clutch game for a while. anyone making anthing with stock feel that will hold power?
ive driven a bunch of spec cars, i drove a buddys SC vett with a mccloud in it, (he had that taken out and put an ls7 in because he couldnt stand it. my other buddys sc Z06 has a spec and i dont want to do that to my car, the chatter, traffic conditions etc it sucks. have been out of the clutch game for a while. anyone making anthing with stock feel that will hold power?
Most people that have a slipping LS7 don't even know it.They slip gradually.I will say that the LS7 clutch has given us alot of tranny rebuilds though.The clutch was designed around 05+ hydrolics.
https://ls1tech.com/forums/texas-mem...clutch-co.html
noyzee, check out that link. this is the clutch i have in my car. i was originally looking at LS7, and then ended up going with this. I know i dont make nearly the power that your z06 does, but a lot of people use this clutch and it feels like stock. its basically a textrailia clone for a lot less money. he sources the clutch assembly itself from the same OEM that makes them for textrailia.
do some searches for TDP clutches and you'll see a lot of positive comments for it.
noyzee, check out that link. this is the clutch i have in my car. i was originally looking at LS7, and then ended up going with this. I know i dont make nearly the power that your z06 does, but a lot of people use this clutch and it feels like stock. its basically a textrailia clone for a lot less money. he sources the clutch assembly itself from the same OEM that makes them for textrailia.
do some searches for TDP clutches and you'll see a lot of positive comments for it.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Yes,the clutch game has changed alot.The monster 3 has been doing well but I have no long term results.Mcleod RXT is extremely streetable and SPEC just totally changed the 3+ line with bigger disks,lighter PP and they are much more drivable now.
Most people that have a slipping LS7 don't even know it.They slip gradually.I will say that the LS7 clutch has given us alot of tranny rebuilds though.The clutch was designed around 05+ hydrolics.
Most people that have a slipping LS7 don't even know it.They slip gradually.I will say that the LS7 clutch has given us alot of tranny rebuilds though.The clutch was designed around 05+ hydrolics.
maybe i'll throw it up for sale and scoop a spec
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
ps. ive installed a few of these into f-bodys with great succes, but they are basic bolt on cars with street tires. maybe thats why. but i guess with 315 drag radials and a 125 shot it might be different.
clutch is for sale in the clasifieds. i will make a better deal for local pick up
clutch is for sale in the clasifieds. i will make a better deal for local pick up
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
to late. i already ordered a spec 3 plus with fly wheel. if it chatters my teeth out. im going to pay you a visit. lol do i need to put the spacer in there like in the f body? hydrolics will remain stock. i do not want to rip into this car any further. i will not even change the exhaust
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
yea, i'll get some city diving on her befor i kill it. lol im all exited to get her together, then the more i think about it, the more i see broken parts. lol