goin heads and cam need input
Thread Starter
12 Second Club
iTrader: (12)
Joined: Feb 2008
Posts: 407
Likes: 0
From: westminster MD
goin heads and cam need input 01 ws6 with full bolt ons
i have a set of prc stage 1 cnc'ed ls6 heads the 237 cc heads
i was thnking mti X1 cam with those heads i have a vig 3800
iam not getting any feed back from the other post so i figure ill ask the peeps i know on here.
what should my gains be and what will the faults be if any?
i dont wanna go bgger i can get decent power out of that cam
help me out guys
i have a set of prc stage 1 cnc'ed ls6 heads the 237 cc heads
i was thnking mti X1 cam with those heads i have a vig 3800
iam not getting any feed back from the other post so i figure ill ask the peeps i know on here.
what should my gains be and what will the faults be if any?
i dont wanna go bgger i can get decent power out of that cam
help me out guys
with that converter i would run polluter cam. very driveable for a big cam
what are your ultimate goals with car?
have ran 224/230 cam in a few cars. have had great results with that cam
what are your ultimate goals with car?
have ran 224/230 cam in a few cars. have had great results with that cam
Thread Starter
12 Second Club
iTrader: (12)
Joined: Feb 2008
Posts: 407
Likes: 0
From: westminster MD
iam not trying to go as big as a polluter cam, i like what i have heard about the X1, not a giant cam great power and great sound. u wouldnt happen to have a cam that would word. iam a cheap ***
