this sucks
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Jul 2004
Posts: 657
Likes: 0
From: attleboro, massachusetts
this sucks Alright so i am trying to save money for modding my car and today we have a meeting at work to be told that we will have a shut down from 11/19-12/1 
. now i have a week and a half off where i have to collect unemployment and am at home trying not to spend money all day. anyone have any ideas of what to do that involves no money? Besides sleep all day, which i have thought about. Also does anyone know of any under the table jobs for that time span?
. now i have a week and a half off where i have to collect unemployment and am at home trying not to spend money all day. anyone have any ideas of what to do that involves no money? Besides sleep all day, which i have thought about. Also does anyone know of any under the table jobs for that time span? Johnston right next to prov. not far from Attleboro It's a frame off job right now the chasse is on a rotisserie. I have a lq9 motor to go in it no tranny yet. I have decided to start working on that again because I am not interested in putting in a roll cage in my 01 TA with T-Tops. So I have one floor pan to weld in or I could remove the old 350 and fab in the lQ9. So what do you like to do body work or motor work?
http://img.photobucket.com/albums/v1...0401111625.jpg
http://img.photobucket.com/albums/v1...0401111625.jpg
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Jul 2004
Posts: 657
Likes: 0
From: attleboro, massachusetts
wow, i am almost certain when i say this, you are a little bit beyond my skills, I have not gone that far in depth into cars yet, i usually do reg maintanice stuff to my car and will leave the big stuff to don. i do not think i will be much help to you
Trending Topics
Sure you don't wana come over and help me scrape off some of the rust from the underside of the chassie 
. Or clean off the thirty some-odd years of road grime from the front frame? 
. Or clean off the thirty some-odd years of road grime from the front frame? LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
about 15 min. from 395 Davered00ss
ninja I'm just kidding there is all kinds of stuff to be done at all kinds of different skill levels. Sure I have to wire brush some loose rust from the undercarrage and powerwash the frame rails but for a begginner it's kind of easy to remove the motor from the rails and stuff. think, about it. I wouldn't make you wire brush the chassis. But moving the frame raills into position to take the motor out with the hoist is going to take two people. I would like to get the motor into place see how it sits before I send it out for macining.
I'm going to go with the SLP rotating assembly and instead of 427ci I'm going to get the 402ci. And because of somepeople complaing about the intercooler wiht the magnacharger I have decided to go wiht a procharger and a external intercooler. But that stuff is a few months away.
wish I had a t56 to see how that lays in the frame. Anyone have a wasted t56 I could use? PureEvil you probably have busted a few got one laying around?
ninja I'm just kidding there is all kinds of stuff to be done at all kinds of different skill levels. Sure I have to wire brush some loose rust from the undercarrage and powerwash the frame rails but for a begginner it's kind of easy to remove the motor from the rails and stuff. think, about it. I wouldn't make you wire brush the chassis. But moving the frame raills into position to take the motor out with the hoist is going to take two people. I would like to get the motor into place see how it sits before I send it out for macining.
I'm going to go with the SLP rotating assembly and instead of 427ci I'm going to get the 402ci. And because of somepeople complaing about the intercooler wiht the magnacharger I have decided to go wiht a procharger and a external intercooler. But that stuff is a few months away.
wish I had a t56 to see how that lays in the frame. Anyone have a wasted t56 I could use? PureEvil you probably have busted a few got one laying around?
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Jul 2004
Posts: 657
Likes: 0
From: attleboro, massachusetts
badpewter i wish i could get a new job but it is only for a week and a half, plus when i get laid off in a year for good, i will get like 5,000 cash and 6,000 to go to school, and be able to go on unemployment for 2 years.
purevil- i have a girlfreind i dont need my hand anymore.
ace- ill see what i can do, what time would you be working on it for? i will be availible from 1130am-600pm.i have to drop my girl off at work at 1100am and pick her up at 730pm on friday and next week i will be availible from 800am-200pm. let me know on the times and i will see what i can do
purevil- i have a girlfreind i dont need my hand anymore.
ace- ill see what i can do, what time would you be working on it for? i will be availible from 1130am-600pm.i have to drop my girl off at work at 1100am and pick her up at 730pm on friday and next week i will be availible from 800am-200pm. let me know on the times and i will see what i can do
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Jul 2004
Posts: 657
Likes: 0
From: attleboro, massachusetts
Originally Posted by My84Z
You have a g/f sleep sex sleep sex..... comeon man what's wrong with you.
