Keeping busy in PA - Pics Inside
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: May 2003
Posts: 1,647
Likes: 0
From: Leominster, MA
Keeping busy in PA - Pics Inside Spent all day today mic-ing parts.
Waiting on new bearing and rings and she is ready for re-assembly
Check it out... I'm so excited I had to post up some pics.
Waiting on new bearing and rings and she is ready for re-assembly
Check it out... I'm so excited I had to post up some pics.
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: May 2003
Posts: 1,647
Likes: 0
From: Leominster, MA
This is how it all started:
I took the heads off to do some porting, ended up dropping the motor out of the car, gutting the interior, welding up my own cage and tearing the motor apart...
I need a cheeper hobby
I took the heads off to do some porting, ended up dropping the motor out of the car, gutting the interior, welding up my own cage and tearing the motor apart...
I need a cheeper hobby
Trending Topics
Originally Posted by davered00ss
I thought you bought Mike's old motor?
Mike said a quick hone and its good as new, thank god
Mike tell the story man
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
TECH Fanatic
iTrader: (1)
Joined: May 2003
Posts: 1,647
Likes: 0
From: Leominster, MA
I think whoever makes the hellfire ring should do the explaining 
The chome insert on the top compression ring actually came out of a portion of the ring in both cylinders
A quick hone and she's all better. I will be running a Speed-Pro plasma moly ring now.
The only real secret here is the picture below... (it reads TTP EQV3) If I could only get some help from Matt@TTP so I could degree this puppy in, just an intake lobe centerline would be enough. No replies to my PMs though
The chome insert on the top compression ring actually came out of a portion of the ring in both cylinders
A quick hone and she's all better. I will be running a Speed-Pro plasma moly ring now.The only real secret here is the picture below... (it reads TTP EQV3) If I could only get some help from Matt@TTP so I could degree this puppy in, just an intake lobe centerline would be enough. No replies to my PMs though
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: May 2003
Posts: 1,647
Likes: 0
From: Leominster, MA
I've started measuring it and it is on the HUGE side for lift. I'll measure duration and overlap as soon as it is back in the block. Out of respect I won't post the actual specs since TTP hasn't disclosed them yet, but if they won't help me out... 
Not trying to **** anyone off, just thought they'd give me a little help???
Not trying to **** anyone off, just thought they'd give me a little help???
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: May 2003
Posts: 1,647
Likes: 0
From: Leominster, MA
Originally Posted by davered00ss
I like that cage a lot. You got me thinking. 
If your talking about Don's new cage, now that is the ****! Can't wait to see it in person!
