JL ws-6

iTrader: (50)

I've seen the one you are running, the one I have on my car's about a foot longer then that, it attaches at the tranny crossmember.

Jokeman

iTrader: (4)

Lemme know if you need it welded up.

Noyzee

iTrader: (37)

i was thinking about cutting it all myself and seeing if your guy will weld it, but im so friggin bussy i know once i getto work and try to cut it etc its going to take a month to do it. if i take a night and make a cardbord one and just send it to dave, it will be done with. we'll see tho.
i'll be messing around tonight if you want to swing by. im either going to finish up my sled for the weekend or maybe mess around a bit with my car. not sure yet. my sled should be done pretty easy in a couple hours just need to clean it, and greese the suspention.

Nautilus

iTrader: (15)

I didn't want to be helping you get your car ready in July again!

If you don't get the quick release bars we're going to have to sawzall two holes in the back or your trailer to fit the ****** in there.

Nautilus

iTrader: (15)

Thanks again to Noyzee for taking my 10 phone calls with questions tonight. Intake off, headers off and the heads... well half off. Bed time, my alarm goes off in 6 hours.

Noyzee

iTrader: (37)

timmy, no problem. i had a big meeting thismorning so i called in early 11:30 so i wasnt junk for my 7:30 meeting.

thats funny **** with the sawz all. lol i just may have to do that. lol

Jokeman

iTrader: (4)

That was funny as hell "Timmy2 again?" "Yup" I could just picture you frustrated as **** in your garage with a beer in your hand.

Noyzee

iTrader: (37)

dont forget about smokin butts

Nautilus

iTrader: (15)

So ******* frustrated... Oh well, back at it tonight.

JL ws-6

iTrader: (50)

What's fighting you so bad? All the **** that makes these cars a PITA to work on are gone from your car....

Nautilus

iTrader: (15)

I have a new found respect for anyone who works on a car in a shitty little garage with no lift.

JL ws-6

iTrader: (50)

Oh **** LOL, welcome to my world LOL. Jackstand city for me baby.

Noyzee

iTrader: (37)

timmy is new at this, he dont know the tricks. lol

10 years of on the ground with no lift etc, now a lift and heated garage, i wont work any other way anymore. lol

JL ws-6

iTrader: (50)

I have 1/2 *** heat, it's better then nothing that's for sure. I will have the elecricity run out there the right way this spring, at that point I can insulate and sheetrock it, so it won't be too bad. Maybe I'll have to get you down to put a space heater in that I can run off a big propane bottle, I have to look into it a little more, make sure the local propane guys will come fill it once or twice a year.



I don't see myself getting a lift anytime soon though. I'm gonna need a taller set of jackstands and a jack that will go higher to drop the tranny so I can pull the motor probably within a month

Nautilus

iTrader: (15)

I have electricity, but my heat is one of those buddy heaters that mounts on a propane bottle. My garage only has one door and is about two cars wide but you can only fit one in there since I have shelves, tool boxes, refrigerator...etc. This weekend I need to find some higher jackstands so I can get the headers out.

Nautilus

iTrader: (15)

Once again huge thanks to Noyzee for not shutting his phone off Even during a movie.

JL ws-6

iTrader: (50)

I use one of those heaters myself, and I've had an extension cord running out to the garage for a year This spring the power's gonna get run out the right way, then I will insulate and sheetrock it. Probably get Brad or someone to come put in a hanging space heater so I don't have to mess with getting little propane bottles filled all the time.

I have a 24x24 with a single 16 foot door, I can put 2 cars in it when it's cleaned up, but I have an entire interior on the floor, dash, etc, plus a bunch of other **** in there. ONce I have it sheet rock'd some shelves will go up on the walls, and I will build a workbench, get my drillpress and all the other good power stuff that's in the basement out there so it's more accessable.

Then there's finishing off 1/2 the basement much like you did a while ago, but that's another project LOL.

I can get headers out with my jackstands, but my jack is shot, and I need to be able to drop a tranny out, which is gonan require more height then I can get out of what I have, nevermind dropping the tranny on my back is gonna suck.

thechef

iTrader: (13)

ya got to extend the jack stands up man, the pic looks like they are on the lowest setting

Noyzee

iTrader: (37)

timmy, looks good bud.. no problem on the phonecalls.even tho you got me when ***** where flopin on the movie. lol we watched Knocked up Unrated, it was funny as hell. lol

timmy, i cant wait to dig into that thing. touch up the wiring, and put in the new NOYZEE fuel system. should be MINT!!!!!!

Noyzee

iTrader: (37)

ps, we need to get you an electric water pump. and if you feel up to it, start to pull your dash so we can rewire easy