whos going to Gainesville tonight?
Thread Starter
TECH Enthusiast
iTrader: (42)
Joined: Apr 2009
Posts: 619
Likes: 1
From: Austin, Texas
saw your GTO running. good times. heard your pickup was going 11s! damn man. i cut a best of 12.33 at 113 mph with a 1.7 60'. i need to do a serious driver mod and 28" MT ETs and i should cut her down good. oh and Local Heretic's MTM WS6 is a factory freak. cutting mid 11s with a cam and stall on a stock suspension/10bolt. VERY impressive! there was also a bunch of C6s as well as a guy from St Augustine with a black Z06 running good numbers then **** his rear end. looking forward to next weekend.
saw your GTO running. good times. heard your pickup was going 11s! damn man. i cut a best of 12.33 at 113 mph with a 1.7 60'. i need to do a serious driver mod and 28" MT ETs and i should cut her down good. oh and Local Heretic's MTM WS6 is a factory freak. cutting mid 11s with a cam and stall on a stock suspension/10bolt. VERY impressive! there was also a bunch of C6s as well as a guy from St Augustine with a black Z06 running good numbers then **** his rear end. looking forward to next weekend.
mY Silverado had nothing in it. My tranny needs Doc to adjust again. I was bouncing off the limiter 3 or more times before it would shift to second. Sucked AZZ.
I didn't know the Z rear went out. Was it the yellow one ?
Thread Starter
TECH Enthusiast
iTrader: (42)
Joined: Apr 2009
Posts: 619
Likes: 1
From: Austin, Texas
no the black one with the spray painted wheels. he said he was hearing a clunking noise when he shifted then later said it took a ****. it wasnt even his car. it was his buddy's.
saw your GTO running. good times. heard your pickup was going 11s! damn man. i cut a best of 12.33 at 113 mph with a 1.7 60'. i need to do a serious driver mod and 28" MT ETs and i should cut her down good. oh and Local Heretic's MTM WS6 is a factory freak. cutting mid 11s with a cam and stall on a stock suspension/10bolt. VERY impressive! there was also a bunch of C6s as well as a guy from St Augustine with a black Z06 running good numbers then **** his rear end. looking forward to next weekend.
28 is a tall tire, I think that will kill your sixty foot. What gear are you running ? I run 26 in slicks on both my strokers, and a 25.5 on drag radials (which is a bit small).
Pitt
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (42)
Joined: Apr 2009
Posts: 619
Likes: 1
From: Austin, Texas
i've got a Moser 9" with 4.30s. i was sidestepping the clutch at 5500ish and it would rap out of first too quickly. i could get some 28s under it and leave on the limiter. mt ET streets are past the wear bar so they are pretty slippery. i cut a best of
R/T .530
60' 1.822
330' 5.153
1/8 7.944
MPH 87.43
1000' 10.342
1/4 12.335
MPH 113.63
my best 60' of the night was a 1.744
my best 60' was
R/T .530
60' 1.822
330' 5.153
1/8 7.944
MPH 87.43
1000' 10.342
1/4 12.335
MPH 113.63
my best 60' of the night was a 1.744
my best 60' was
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo i've got a Moser 9" with 4.30s. i was sidestepping the clutch at 5500ish and it would rap out of first too quickly. i could get some 28s under it and leave on the limiter. mt ET streets are past the wear bar so they are pretty slippery. i cut a best of
R/T .530
60' 1.822
330' 5.153
1/8 7.944
MPH 87.43
1000' 10.342
1/4 12.335
MPH 113.63
my best 60' of the night was a 1.744
my best 60' was
R/T .530
60' 1.822
330' 5.153
1/8 7.944
MPH 87.43
1000' 10.342
1/4 12.335
MPH 113.63
my best 60' of the night was a 1.744
my best 60' was
Yeah, I agree (I didn't notice your gear). With that rear end a 28" will set you off !! It will just be the tire pressure game !
Thread Starter
TECH Enthusiast
iTrader: (42)
Joined: Apr 2009
Posts: 619
Likes: 1
From: Austin, Texas
i was at 13 psi for the 12.60s and 10 psi for the 12.30s but it was a death trap at the big end. i'm going 28s next time and shooting for 11s.
http://s184.photobucket.com/albums/x...t=1233edit.flv
http://s184.photobucket.com/albums/x...t=1233edit.flv
Last edited by 98TA6.0; Oct 25, 2009 at 03:02 PM.
