Dissapointing Dyno Results!!!
Originally Posted by bigken
you tried running 1.8's and they didnt work with your setup?.... so you think if i go to a 1.7 roller rocker then it might fix my problem??.. if so, what rocker do you recommend???
Thread Starter
Launching!
iTrader: (8)
Joined: Feb 2005
Posts: 276
Likes: 1
From: springhill florida
Originally Posted by zamboxl
no tr has it on next to their cam drescription when u gona go pick one it says 1.8 rockers are not recomended with the cam bacause of the ramp rate. so i never had it on my car but if the manufacture has that warning on their site then y take my chances and not listen. also like i said before that weiand intake is crap i had it on my car, and i swear no lie every single runner would leak u have to double gasket them to help out the leaking but even then the heat soke is horrible and its just a bad design overall.
yea i believe that bc after one pull on the dyno it developed a vacume leak, so i am going to switch it out with either a ls6, or the 78mm fast and try going to a 1.7 roller rocker and mabye getting bigger fuel injectors. i am going to call comp cams tech line in the morning and see what they reccomend as far as rocker ratio goes.....
Thread Starter
Launching!
iTrader: (8)
Joined: Feb 2005
Posts: 276
Likes: 1
From: springhill florida
Originally Posted by gator's 99TA
i dynoed 328 rwhp with a cammed stock headed ls1! this was at RX as well. talk about disappointment!!!
Makes you wanna walk in front of oncomming traffic
after spending all of this money I was expecting over 400 a4 or not
see what happens in a few weeks... what size cam are you running???..
230/230 .563 111 lsa comp xe grind
RX had nothing to do with the install. that was all me. just the numbers put down on their dyno.
my dyno results dont make me want to walk infront of incoming traffic.
RX had nothing to do with the install. that was all me. just the numbers put down on their dyno.
my dyno results dont make me want to walk infront of incoming traffic.
Thread Starter
Launching!
iTrader: (8)
Joined: Feb 2005
Posts: 276
Likes: 1
From: springhill florida
Originally Posted by gator's 99TA
230/230 .563 111 lsa comp xe grind
RX had nothing to do with the install. that was all me. just the numbers put down on their dyno.
my dyno results dont make me want to walk infront of incoming traffic.
RX had nothing to do with the install. that was all me. just the numbers put down on their dyno.
my dyno results dont make me want to walk infront of incoming traffic.
relax buddy.......wasnt blaming rx for the number more or less getting at how frustrating it can be to put all this money into a car and still not have it run the way you want it to...I myself did all of the install work on my car...
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo