Power vs weight for next
Thread Starter
10 Second Club
iTrader: (9)
Joined: Jan 2004
Posts: 560
Likes: 0
From: Daytona Beach, FL
Power vs weight for next Where did you weigh your car and what are carrying around in it that adds so much weight? Just that I've never heard of a raceweight that high in a late model Fbody. Post up your previous known power level vs. mph before you were having problems.
__________________
My last setup was 490 rwhp on a 100 shot.
My best mph was 127. The only time I sprayed the 200 on the nittos
I spun the entire track and ran 129 mph
The old setup was 226 228 cam t-56 and 10 bolt on nittos
The new setup is big cam th400, 4200 stall, 12 bolt, bmr xtreme suspension
Wolfe rollgage, Dual stage NX 100/100, and mt drag 28x10.5.
The new dyno was 530 on the 200 through the th400 and 580 with the t-56.
I don't know the weight before, but with dennis from Action Performance driving the car it was 3900lbs at osw after my 10.6@ 126 run. Dennis is a pretty big guy.
__________________
My last setup was 490 rwhp on a 100 shot.
My best mph was 127. The only time I sprayed the 200 on the nittos
I spun the entire track and ran 129 mph
The old setup was 226 228 cam t-56 and 10 bolt on nittos
The new setup is big cam th400, 4200 stall, 12 bolt, bmr xtreme suspension
Wolfe rollgage, Dual stage NX 100/100, and mt drag 28x10.5.
The new dyno was 530 on the 200 through the th400 and 580 with the t-56.
I don't know the weight before, but with dennis from Action Performance driving the car it was 3900lbs at osw after my 10.6@ 126 run. Dennis is a pretty big guy.
The project is still being built, but it's a 6.0L w/ the MS3 and LPE heads, 2.02/1.57 valves. Shooting for 400-425 rwhp, if the '93 Cav tranny stays in one piece 
. The car should be around 2600 lbs when done, started at 2700 lbs. Hopefully mid 11s. Oh yeah, its a '87 Fiero 
, not a F-body, sorry.
. The car should be around 2600 lbs when done, started at 2700 lbs. Hopefully mid 11s. Oh yeah, its a '87 Fiero , not a F-body, sorry. 
