Need a Dip Stick

Reply Subscribe

Thread Tools

Search this Thread

Mar 9, 2007 | 07:51 AM

Razor_Blade

Thread Starter

TECH Resident

iTrader: (8)

Joined: Jul 2006

Posts: 826

Likes: 0

From: Florida

Need a Dip Stick

I got a little rough and broke the plastic crap on my dip stick and tube, while removing it for a header install. Does anyone local to Orlando have one laying around that you don't need?

Edit: Duhhh! I guess it would help to say it is for a 94 LT1.

Last edited by Razor_Blade; Mar 9, 2007 at 08:08 AM.

Mar 9, 2007 | 09:35 AM

The SSheriff

TECH Regular

iTrader: (4)

Joined: Oct 2006

Posts: 492

Likes: 0

From: The Plywood State

Coming from experience (for a friend's car), you will NEVER find this part, nor any engine part, at a junkyard. Almost all the cars at the junkyards around Orlando take the motors out first before putting them out on the lot. I would suggest joining a lot of local F-body associations (sffba.net, rivercityf-bodies.com, etc)

Also, look in the "parts for sale" section of this site. There are tons of engine parts available. Check the LT1 sections as well. You're bound to come up with something.

Mar 9, 2007 | 09:49 AM

anasazi

Staging Lane

Joined: Apr 2004

Posts: 72

Likes: 0

From: UCF, Orlando, FL

i did the same thing on my old LT1

i think they are like $26 from a dealer, your much better off going that route.

Mar 9, 2007 | 03:50 PM

Razor_Blade

Thread Starter

TECH Resident

iTrader: (8)

Joined: Jul 2006

Posts: 826

Likes: 0

From: Florida

Thanks guys. I figured that I would end up ordering one from a dealer. I decided to take a stab at it here first. I'm not gonna waste much time trying to track down a used one.