dRILL mOD hELP
Thread Starter
12 Second Club
Joined: May 2006
Posts: 54
Likes: 0
From: Ft Lauderdale, FL
dRILL mOD hELP Does anyone know how to do the drill mod or has anyone done it im having some problems with the 2>3 and 3>4 shift and i read the sticky and according to whoever wrote it (the write up) the drill mod will/should fix my problem if anyone knows how to do this in the Ft Lauderdale or Miami area pm me or call me @ 954-849-1355 ill hook you up money beer whatever you want please help me i want my car to shift gears better and id screw it up if i tried the drill mod myself
thanks
chris
thanks
chris
-take a small punch to the pin holding the braided line to the master cylnder.
-pop it out and put the line out
-take a 1/8th inch drill bit and drill out the restriction
-when i did mine i held it upside down so the shavings would fall, btw brake fluid will spill out.
or do this http://www.installuniversity.com/ins...sity/index.htm
-pop it out and put the line out
-take a 1/8th inch drill bit and drill out the restriction
-when i did mine i held it upside down so the shavings would fall, btw brake fluid will spill out.
or do this http://www.installuniversity.com/ins...sity/index.htm
