MS3/Procharger
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Aug 2008
Location: Gulfport, MS/ New Concord, OH
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
MS3/Procharger
Have any of you guys ran the TSP MS3 cam with a D1SC Procharger? If so any input on likes and dislikes, do's and don'ts. I know the MS3 wouldn't be most peoples first choise but it's already in the car and would save alot of trouble.
Thanks
Thanks
#3
Dumb Ass Vette Moderator
iTrader: (20)
In general for most people that do not have a favorable cam for FI, is to try it. You will not make the most power you possibly could, but the cams for the most part are better than stock ones. A cam swap is not nearly as bad as most people think. With a friend helping, using some of the doc that is out there, it can be done in a weekend for the novice wrench turner.
#4
TECH Enthusiast
iTrader: (17)
I would try it. your going to get more power eithier way, you cant loose. Then later if you want a cam better suited for f/i, change it. there are some people that have asked this question but I have never seen them post results. There was someone with a t-rex that wanted to do this but I never heard anything more than just the question.