Forced Induction Superchargers | Turbochargers | Intercoolers

will i need it re-tuned

Thread Tools
 
Search this Thread
 
Old 11-15-2008 | 10:40 PM
  #1  
extremetoy's Avatar
Thread Starter
11 Second Club

iTrader: (17)
 
Joined: Oct 2007
Posts: 344
Likes: 0
From: pleasanton ca
Default will i need it re-tuned

ive got a turboed 6.0l and im about to throw on some heads.. im going to go to a 2 bar map and up the boost in a month or two so it will need tuning then. will I be ok putting the patriots on and not tuning it and just keeping a close eye on the wideband?

thanks, Gary
Old 11-16-2008 | 09:50 AM
  #2  
Sideways240sx's Avatar
9 Second Club

iTrader: (22)
 
Joined: Mar 2006
Posts: 1,569
Likes: 1
From: Byron, IL
Default

Im no expert in tunning. just starting. My biggest concern would be what head are you going to run? if your sticking with a 6.0 ported it should be ok. But if your going to a ls6, or 5.3 or something different you will raise the compression. IF that were the cause i would want to pull some timing out of it. Lower compression would allow you to run a little higher timing.

Again might have better luck in the tunning section, or with someone who knows alot about tunning.

Good luck, Chris
Old 11-16-2008 | 10:55 AM
  #3  
extremetoy's Avatar
Thread Starter
11 Second Club

iTrader: (17)
 
Joined: Oct 2007
Posts: 344
Likes: 0
From: pleasanton ca
Default

good point... going from the 317 to ported 317 w/ slightly larger valves... same combustion chamber size.
Old 11-16-2008 | 08:34 PM
  #4  
extremetoy's Avatar
Thread Starter
11 Second Club

iTrader: (17)
 
Joined: Oct 2007
Posts: 344
Likes: 0
From: pleasanton ca
Default

anyone?
Old 11-16-2008 | 09:47 PM
  #5  
black98ws6ta's Avatar
TECH Addict
iTrader: (77)
 
Joined: May 2002
Posts: 2,107
Likes: 2
From: louisville,ky
Default

Just keep an eye on the wideband, but if they do there job the engine should need more fuel at a lower boost level.
Old 11-17-2008 | 05:21 AM
  #6  
EPP's Avatar
EPP
FormerVendor
iTrader: (22)
 
Joined: Mar 2003
Posts: 13,063
Likes: 2
Default

Since you do have a wideband I don't see a problem waiting. Bob




All times are GMT -5. The time now is 02:26 PM.