thinking about going turbo?
thinking about going turbo? i have an 02 z28 six speed car and was thinking about a front mount turbonetics tc78 with stock 317 heads and a ls6 cam with 8-10lbs of boost. would this work well for a dd. what wastegate and bov? would 60# injectors work with a 255 pump? let me know what you are thinking!
i have an 02 z28 six speed car and was thinking about a front mount turbonetics tc78 with stock 317 heads and a ls6 cam with 8-10lbs of boost. would this work well for a dd. what wastegate and bov? would 60# injectors work with a 255 pump? let me know what you are thinking!
what head gasket would i use stock ls1 or 6.0 since i would have the 6.0 317 heads? can i use 7.400 pushrods with the ls6 cam? whats a good set of valvesprings for boost. i hear double springs a like insurance?
Get a set of good GM MLS head gaskets.
Patriot or PRC duals.
7.4 Hardened pushrods.
It is all good insurance to have for the build.
Stick with a good 38mm WG and a 50mm BOV.
Dont over complicate the build.
Patriot or PRC duals.
7.4 Hardened pushrods.
It is all good insurance to have for the build.
Stick with a good 38mm WG and a 50mm BOV.
Dont over complicate the build.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
