Which Blower Cam?
Which Blower Cam? My build:
2006 A6 Corvette
AFR 205's milled to 65 cc
Maggie MP112
Extreme duty springs and pushrods
Yank 3200 stall
Bassani headers
Bassani cat back with highflow cats
Yella Terra 1.7 Shaft mount rockers
I've got it narrowed down to, 2 different cams I'm considering.
The first one:
DUR @ .004" 294* / 302*
DUR @ .050" 232*/ 240*
LIFT .600/.600
OVERLAP 64*
LSA 117*
The second one:
Dur @ .050 232 int 240 exh
Lift .595 int .608 exh
Lobe Sep 115.0
I'm not sure what the overlap on this one is. This is the EPP Blower cam.
Which one would be better?
2006 A6 Corvette
AFR 205's milled to 65 cc
Maggie MP112
Extreme duty springs and pushrods
Yank 3200 stall
Bassani headers
Bassani cat back with highflow cats
Yella Terra 1.7 Shaft mount rockers
I've got it narrowed down to, 2 different cams I'm considering.
The first one:
DUR @ .004" 294* / 302*
DUR @ .050" 232*/ 240*
LIFT .600/.600
OVERLAP 64*
LSA 117*
The second one:
Dur @ .050 232 int 240 exh
Lift .595 int .608 exh
Lobe Sep 115.0
I'm not sure what the overlap on this one is. This is the EPP Blower cam.
Which one would be better?
Between those two, I would go with the first one. The second one will bleed off a little too much boost with the maggie. Even with the 117 LSA, the durations of 232/240 are going to create some overlap and bleed off boost.
