Catch can/ PCV installation confusion - help appreciated
Thread Starter
TECH Resident
Joined: Aug 2008
Posts: 910
Likes: 0
From: Dubai
Catch can/ PCV installation confusion - help appreciated Well here goes,
Looking at the catch can, and then having a look at my engine, this catch-can is supposed to hook up to the valley cover hose, and to the intake manifold (on a non boosted application).
Now looking at the Warhawk, there is no valley cover hose, so where do I hook up my catch-can and how do I set-up my PCV system
This is what im thinking:
Remove the line that usually comes out of the dry-symp resevoir and connects to the air bridge, hook it up to the catch-can, connect the other end of the catch-can to one of the turbo filters.
Looking at the catch can, and then having a look at my engine, this catch-can is supposed to hook up to the valley cover hose, and to the intake manifold (on a non boosted application).
Now looking at the Warhawk, there is no valley cover hose, so where do I hook up my catch-can and how do I set-up my PCV system
This is what im thinking:
Remove the line that usually comes out of the dry-symp resevoir and connects to the air bridge, hook it up to the catch-can, connect the other end of the catch-can to one of the turbo filters.
Last edited by ayousef; Jan 6, 2009 at 06:18 AM.
