oil in down pipe
I was reading about how you need to let it get up to like 500* (the turbo) and get everything "seated" seems kinda strage to me.I'm running a mp t76 q trim. of course I havent gotton on it due to not being tuned,but any gas at all and it just blows smoke. like I said at first you could see it dripping off the pipes. (coming off a v-band I have right before the k-member)
the turbo does sit pretty low, much lower then any other set-up I have ever done/seen. thinking maybe I have to run a return pump.
anyways just looking for some other input,thoughts,expercinces ect...
thanks
matt
Bottom line is that if your getting more oil than you can return, you're gonna get smoke. Someone on here told me most turbos need about .8L per minute for proper operation.
I guess the oil system is the nemesis of custom built turbo setups. At least that is what I've been reading.
Bottom line is that if your getting more oil than you can return, you're gonna get smoke. Someone on here told me most turbos need about .8L per minute for proper operation.
I guess the oil system is the nemesis of custom built turbo setups. At least that is what I've been reading.
If you are getting more oil in that turbocharger than can be returned, the solution cannot be to restrict the oil the turbo is getting by default... You have to ensure the turbo is getting the right amount of oil, whether or not its return is a problem... If returning it is a problem, adding an aux. scavenger pump would be the solution, not restricting the oil to the turbo, generally.
If I turn my savenger pump off manually, my car will start smoking almost immediately... On however, it's completely fine... Not too much oil, just not enough of a way for it to go back.

