Ninetres > ZX10 video
08-26-2009, 12:55 PM
#22
Wow. I thought it was higher......not that my car doesn't haul the mail for a midframe T4 turbo, cause it definitely does, I just didn't know 119lbs can push my 3600lb car 150+!!!!
More specs as someone wanted: 9.1:1 370ci, TH400, 3.25 gears, MT ET drags 28x10.5x15 stiffs.
1/4 was marked 15 feet beyond camera man.
More specs as someone wanted: 9.1:1 370ci, TH400, 3.25 gears, MT ET drags 28x10.5x15 stiffs.
1/4 was marked 15 feet beyond camera man.
08-26-2009, 01:18 PM
#26
Wow. I thought it was higher......not that my car doesn't haul the mail for a midframe T4 turbo, cause it definitely does, I just didn't know 119lbs can push my 3600lb car 150+!!!!
More specs as someone wanted: 9.1:1 370ci, TH400, 3.25 gears, MT ET drags 28x10.5x15 stiffs.
1/4 was marked 15 feet beyond camera man.
More specs as someone wanted: 9.1:1 370ci, TH400, 3.25 gears, MT ET drags 28x10.5x15 stiffs.
1/4 was marked 15 feet beyond camera man.
08-26-2009, 01:33 PM
#28
T4 ST80 with race cover and 1.1ar ex
High temp Coated truck mainfolds
High temp Coated/wrapped y-pipe
tial 44mm WG with 3 springs and dump tube
tial 50mm BOV
big A2A
cold pipe is already set-up for dual meth kit (can be capped if not used)
4" DP with 3" exhaust with 2 mufflers.
silicone/t-bolts
ALT relocation bracket
PS delete idler pulley
Griffin radiator
Flexalite pushers
I might be forgetting some things, but that's the basics.
. ~1520hp. Of course these are all manufacture ratings so always keep that in mind. 
08-26-2009, 03:50 PM
#34
5-6 grand. Very complete. I run a PA racing k-member and PA steering rack. Might fit with another setup....with some slight modification.
T4 ST80 with race cover and 1.1ar ex
High temp Coated truck mainfolds
High temp Coated/wrapped y-pipe
tial 44mm WG with 3 springs and dump tube
tial 50mm BOV
big A2A
cold pipe is already set-up for dual meth kit (can be capped if not used)
4" DP with 3" exhaust with 2 mufflers.
silicone/t-bolts
ALT relocation bracket
PS delete idler pulley
Griffin radiator
Flexalite pushers
I might be forgetting some things, but that's the basics.
T4 ST80 with race cover and 1.1ar ex
High temp Coated truck mainfolds
High temp Coated/wrapped y-pipe
tial 44mm WG with 3 springs and dump tube
tial 50mm BOV
big A2A
cold pipe is already set-up for dual meth kit (can be capped if not used)
4" DP with 3" exhaust with 2 mufflers.
silicone/t-bolts
ALT relocation bracket
PS delete idler pulley
Griffin radiator
Flexalite pushers
I might be forgetting some things, but that's the basics.
08-26-2009, 04:02 PM
#35
http://calibercustoms.com/cagle_camaro_2.htm
These pics are quite outdated. The pics here have a 76gts. I don;t have any with the st80 but I will snap a bunch when I officially put the kit up for sale. The y-pipe is now wrapped with 02 bungs on it for better drivability.
These pics are quite outdated. The pics here have a 76gts. I don;t have any with the st80 but I will snap a bunch when I officially put the kit up for sale. The y-pipe is now wrapped with 02 bungs on it for better drivability.
