New best with the Ebay kit!
Thread Starter
Launching!
iTrader: (7)
Joined: Jan 2006
Posts: 292
Likes: 0
From: Lexington, Kentucky
New best with the Ebay kit! Best of 10.92 at 123, 1.73 60ft. and backed it up with 10.95 at 126 1.81 60ft.
I was excited when I got my slip becouse the first 2 runs where 11.17 and 11.18. Oh and still on the stock 10 bolt with a 2.73 gear and 28 inch tire!!
I was excited when I got my slip becouse the first 2 runs where 11.17 and 11.18. Oh and still on the stock 10 bolt with a 2.73 gear and 28 inch tire!!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Launching!
iTrader: (7)
Joined: Jan 2006
Posts: 292
Likes: 0
From: Lexington, Kentucky
Thanks everyone. I am very pleased with the car. I have yet to take any weight out of it! still has full interior. I am going to try and get it weighed this week some time and go from there.
Thread Starter
Launching!
iTrader: (7)
Joined: Jan 2006
Posts: 292
Likes: 0
From: Lexington, Kentucky
The only problems I had was some fittment issues with the wastegate. I ended up cutting the tube off that feeds it back into the down pipe. So it just goes to the atmosphere. Some people have had issues with the driver side header not bolting up, but easily fixed with makeing the first hole bigger. Definitely takes more than just buying it and slapping it on, But still very much worth it.
The only problems I had was some fittment issues with the wastegate. I ended up cutting the tube off that feeds it back into the down pipe. So it just goes to the atmosphere. Some people have had issues with the driver side header not bolting up, but easily fixed with makeing the first hole bigger. Definitely takes more than just buying it and slapping it on, But still very much worth it.
Nice times! What were your 1/8th? I don't have a 1/4 close so I have to compare 1/8th mile times. Are you running a 2 step or trans brake? I've got to get my th400 in
