Wanted: cheap turbo
Thread Starter
TECH Veteran
iTrader: (4)
Joined: Nov 2001
Posts: 4,712
Likes: 0
From: Simi Valley, CA
Wanted: cheap turbo I think I'm going to try the remote mount turbo on my 4.3L Sonoma for kicks. I'd like something that has the standard 4 bolt square exhaust inlet flange, and circular exhaust outlet flange (T4?), that can support at least 450rwhp (in case I decide to move the turbo to something else later). I'm thinking someone who bought a T-60 kit and upgraded to a T-76 might have something sitting around. The cheaper the better! 
I'll also need an electric scavenging pump and a small external wastegate, so drop me a line of you have those parts as well.
I'll also need an electric scavenging pump and a small external wastegate, so drop me a line of you have those parts as well. 
I have a t-60, with a TO4E exhaust housing on it, it is the round outlet. nice little turbo it was the original from my turbo tech kit
let me know, i dont want much
thanks
ed
firebird455@onebox.com
let me know, i dont want much
thanks
ed
firebird455@onebox.com
Originally Posted by Terry Burger
I think I'm going to try the remote mount turbo on my 4.3L Sonoma for kicks. I'd like something that has the standard 4 bolt square exhaust inlet flange, and circular exhaust outlet flange (T4?), that can support at least 450rwhp (in case I decide to move the turbo to something else later). I'm thinking someone who bought a T-60 kit and upgraded to a T-76 might have something sitting around. The cheaper the better! I'll also need an electric scavenging pump and a small external wastegate, so drop me a line of you have those parts as well.
I'll also need an electric scavenging pump and a small external wastegate, so drop me a line of you have those parts as well. Thread Starter
TECH Veteran
iTrader: (4)
Joined: Nov 2001
Posts: 4,712
Likes: 0
From: Simi Valley, CA
Originally Posted by 69firebird
I have a t-60, with a TO4E exhaust housing on it, it is the round outlet. nice little turbo it was the original from my turbo tech kit
let me know, i dont want much
thanks
ed
firebird455@onebox.com
let me know, i dont want much
thanks
ed
firebird455@onebox.com
Sounds like exactly what I need! I sent you an email.
Thread Starter
TECH Veteran
iTrader: (4)
Joined: Nov 2001
Posts: 4,712
Likes: 0
From: Simi Valley, CA
Originally Posted by rodent
Let us know how that works out. I was thinking of adding the same setup on my 4.3 S-10 Blazer ZR2. With the 2" body lift, I might be able to get closer to the engine (at y-pipe) but I'm not sure yet.
There is really a ton of space down there, so much so that I once thought of mounting a 10# n2o bottle under the truck, and it would have still been above the subframe.
