67 Nova twin turbo build
Thread Starter
Joined: Jun 2003
Posts: 285
Likes: 0
From: Home of the sideshows!
67 Nova twin turbo build so here is the car and here is the list ....any advise is welcomed
*ls2
*m6
12 bolt
precision turbos (undecided on the size)
precision turbo wastegates
tial blowoff valve 50mm
eboost2 controller with twin solenoids
*1-7/8 stailess headers
*3in downpipes
*borla mufflers
aeromotive fuel system
*stainless exhaust all mandrel bends
*carbon fiber hood,trunk
asanti wheels
*6 piston calipers all arround
and most likely tuned @ newtech
* <~~~have it already
ok so the car its in ok shape but it will be redone again oh man a.d.d its a **** lol
here are some pics ....will post updates real soon as we in the middle moving to a bigger location
*ls2
*m6
12 bolt
precision turbos (undecided on the size)
precision turbo wastegates
tial blowoff valve 50mm
eboost2 controller with twin solenoids
*1-7/8 stailess headers
*3in downpipes
*borla mufflers
aeromotive fuel system
*stainless exhaust all mandrel bends
*carbon fiber hood,trunk
asanti wheels
*6 piston calipers all arround
and most likely tuned @ newtech
* <~~~have it already
ok so the car its in ok shape but it will be redone again oh man a.d.d its a **** lol
here are some pics ....will post updates real soon as we in the middle moving to a bigger location
Thread Starter
Joined: Jun 2003
Posts: 285
Likes: 0
From: Home of the sideshows!
its all gonna be replaced but as of right now its ccp bottom with qa1 coilovers
there is a nova wagon here with twins too i believe its parish8 something like that
there is a nova wagon here with twins too i believe its parish8 something like that
Yes, seen the wagon. I got a HDTP with an Alston front clip. If I could sell the 555"BBC in it for decent money I would do a TT LSX.
Post pics of your progress.
You should check out StevesNovaSite.com if you haven't.
Post pics of your progress.
You should check out StevesNovaSite.com if you haven't.
Thread Starter
Joined: Jun 2003
Posts: 285
Likes: 0
From: Home of the sideshows!
yeah i will be posting updated pics starting next week as soon as we figure how to route the headers without cutting the inner fenders ,the tear down started last thursday so its gonna be fun ....send me some pics of yours ,we on that website too
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Joined: Jun 2003
Posts: 285
Likes: 0
From: Home of the sideshows!
we want to keep it so we gonna see what has to be done in the next couple of days ,maybe just reshaping and trimming the inner fenders but not trying to cut too much because i like to leave them as stock looking as possible
by the way nice nova you are building ....do you have the fans for the radiator ? or still working on that ?
by the way nice nova you are building ....do you have the fans for the radiator ? or still working on that ?
Last edited by gEtyOPaPiOn; Jan 17, 2010 at 01:40 PM. Reason: add to response
we want to keep it so we gonna see what has to be done in the next couple of days ,maybe just reshaping and trimming the inner fenders but not trying to cut too much because i like to leave them as stock looking as possible
by the way nice nova you are building ....do you have the fans for the radiator ? or still working on that ?
by the way nice nova you are building ....do you have the fans for the radiator ? or still working on that ?
Nice job on the build! Any updates on the streetability of the car, do you have the bugs worked out yet? I am in the process of a very similar project in a 65 Nova right now and got some good ideas from your thread. I was set on a pair of GT3582R's but I am tempted to give the 6265's a try after reading this. Are your 6265's ball bearing or journal bearing and how is spoolup on the street?
Nice job on the build! Any updates on the streetability of the car, do you have the bugs worked out yet? I am in the process of a very similar project in a 65 Nova right now and got some good ideas from your thread. I was set on a pair of GT3582R's but I am tempted to give the 6265's a try after reading this. Are your 6265's ball bearing or journal bearing and how is spoolup on the street?
How the build coming along getyopapion?
