Smooth Idler and J-Bracket?
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Dec 2001
Location: Cape Coral, Florida
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Smooth Idler and J-Bracket?
I am installing the J-Bracket for my Procharger and I ran into a problem...
While installing the smooth idler, the one next to the alternator, I seem to have misplaced one of the stamped washers/dust covers. I have the washer/dust cover that goes in between the idler and the car but not the one that goes in between the idler and the Procharger supplied standoff. I see that some people are installing new idlers from autozone without the washer/dust covers but I assume this would change the offset of the standoff on the J-Bracket. Anyone know the part number for the larger washer/dust cover? Any other suggestions?
Why do the 98-99 models use the 1.875" standoff on the idler and 00-02 use the 1.750" standoff?
Do the 98-99 models have the washers/dust covers?
While installing the smooth idler, the one next to the alternator, I seem to have misplaced one of the stamped washers/dust covers. I have the washer/dust cover that goes in between the idler and the car but not the one that goes in between the idler and the Procharger supplied standoff. I see that some people are installing new idlers from autozone without the washer/dust covers but I assume this would change the offset of the standoff on the J-Bracket. Anyone know the part number for the larger washer/dust cover? Any other suggestions?
Why do the 98-99 models use the 1.875" standoff on the idler and 00-02 use the 1.750" standoff?
Do the 98-99 models have the washers/dust covers?